Effect of Alloying Elements on the Corrosion Behavior of Carbon Steel in CO2 Environments
Authors:
- 1 May 2018
- journal article
- research article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 74 (5) , 566-576
Abstract
The objective of the present study was to evaluate the effect of alloying elements (Cr, Mo, and Cu) on the corrosion behavior of low carbon steel in CO2 environments. Six samples were prepared with varying Cr content from 0 wt% to 2 wt% and with added 0.5 wt% of Mo and Cu; the specimens had ferritic/pearlitic microstructures. Steel samples were exposed to a CO2-saturated 1 wt% NaCl solution with different combinations of pH and temperature (pH 4.0 at 25°C, pH 6.6 at 80°C, and pH 5.9 at 70°C). Changes in corrosion rate with time were determined by linear polarization resistance measurements. The surface morphology and the composition of the corrosion product layers were analyzed by surface analysis techniques (scanning electron microscopy and energy dispersive x-ray spectroscopy). Results showed that the presence of Cr and Cu showed a slight positive effect on the corrosion resistance at pH 4.0 and 25°C. At pH 6.6 and 80°C, regardless of the alloying elements, the trend of corrosion rate with time was similar, i.e., the corrosion rate of all specimens decreased with time resulting from the formation of protective FeCO3. A beneficial effect of Cr presence was clearly seen at “gray zone” conditions: pH 5.9 and 70°C, where steel sample without Cr showed no decrease in corrosion rate with time. The presence of Cr in the steel promoted the formation of protective FeCO3 with Cr enrichment and it decreased the corrosion rate.Keywords
This publication has 18 references indexed in Scilit:
- A direct measurement of wall shear stress in multiphase flow—Is it an important parameter in CO 2 corrosion of carbon steel pipelines?Corrosion Science, 2016
- Effect of Cr content on the corrosion performance of low-Cr alloy steel in a CO2 environmentApplied Surface Science, 2016
- Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: A reviewCorrosion Science, 2014
- Wellbore integrity and corrosion of low alloy and stainless steels in high pressure CO2 geologic storage environments: An experimental studyInternational Journal of Greenhouse Gas Control, 2014
- Corrosion behavior of low-alloy steel containing 1% chromium in CO2 environmentsCorrosion Science, 2013
- Corrosion of Cr bearing low alloy pipeline steel in CO2 environment at static and flowing conditionsApplied Surface Science, 2013
- Corrosion of alloy steels containing 2% chromium in CO2 environmentsCorrosion Science, 2012
- Key issues related to modelling of internal corrosion of oil and gas pipelines – A reviewCorrosion Science, 2007
- The influence of microstructure and chemical composition of carbon and low alloy steels in CO2 corrosion. A state-of-the-art appraisalMaterials & Design (1980-2015), 2003
- An Electrochemical Model for Prediction of Corrosion of Mild Steel in Aqueous Carbon Dioxide SolutionsCorrosion, 1996