Heat flux distribution and temperature prediction model for dry and wet cylindrical plunge grinding
- 7 December 2018
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 233 (10) , 2047-2060
Abstract
The grinding heat is generally partitioned into the workpiece, wheel, chips and fluid in grinding process. The total amount of heat flux entering into the workpiece greatly affects the final workpiece surface temperature, which may cause undesirable workpiece burn. Moreover, the variable grinding chip thickness and fluid injection speed along the grinding contact zone could substantially change the specific energy and the shape of the heat source correspondingly. In this article, a Weibull heat flux distribution model for both dry and wet grinding temperature prediction was proposed by analyzing two key parameters: energy partition Rw and shape parameter k. The value of Rw was obtained by considering the real contact length, the active grits number and the average grit radius r0 on the basis of traditional formulas. The relationship between shape parameters k and useful flow was established by a FLUENT simulation of the convective grinding fluid applied in grinding contact zone with wheel-workpiece minimum clearance. The grinding temperature and grinding force experiments were conducted on a grinding machine MGKS1332/H to validate the proposed heat flux model. The calculated workpiece surface temperature distribution was obtained by using the experimental heat flux obtained by the reverse algorithm, and the error between calculated temperature and experimental temperature was analyzed. With the monitored force signals and the proposed temperature prediction model, the grinding temperature for both dry and wet grinding can be predicted, which will be helpful to the optimization and control of temperature in grinding process.Keywords
Funding Information
- the Fundamental Research Funds for the Central Universities (NO. 2232018D3-14 & 2232018D3-25)
- the China Postdoctoral Science Foundation (2018M630384)
This publication has 21 references indexed in Scilit:
- Optimisation of fluid application in grindingCIRP Annals, 2008
- Thermal Analysis of GrindingCIRP Annals, 2007
- Heat flux distribution model by sequential algorithm of inverse heat transfer for determining workpiece temperature in creep feed grindingInternational Journal of Machine Tools and Manufacture, 2006
- Analysis of Grinding Chip Temperature and Energy Partitioning in High-Efficiency Deep GrindingProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006
- Fluid Flow and Pressure in the Grinding Wheel-Workpiece InterfaceJournal of Manufacturing Science and Engineering, 2005
- Evaluation of grinding fluids in the grinding of a martensitic valve steel with CBN and alumina abrasivesProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2003
- Computer simulation of a workpiece temperature field during the grinding processProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2003
- Estimation of the convection heat transfer coefficient of coolant within the grinding zoneProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2003
- Temperature case studies in grinding including an inclined heat source modelProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2001
- Analysis of Grinding Temperatures by Energy PartitioningProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1996