Excavator Bucket Design with Different Steel Materials: Topology Optimization and Cost Analysis
- 1 June 2026
- journal article
- Published by Kocaeli Journal of Science and Engineering in Kocaeli Journal of Science and Engineering
- Vol. 2026 (17) , 161-170
Abstract
Topology optimization is a type of analysis that aims to reduce the weight of a design operating under specific load and boundary conditions, and it achieves this by optimizing the results. In this study, topology optimization was performed on an excavator bucket to reduce the weight of the material through design changes, and the results were compared with two different materials. Since the design obtained as a result of topology optimization is not a realistic excavator bucket design, the visuals are only used as a reference in the new design. In this study, a new design with reduced weight and almost the same strength was obtained as a result of topology optimization. The designs before and after the analysis were created using the computer-aided software. The analyses were performed using the finite element analysis software. During the analysis, Hardox 450 and St-37 materials were used. During optimization, total deformation, equivalent stress safety factors, and costs were compared. As a result of the study, similar values to those obtained in the first model were obtained for stress, deformation and safety factor values in the new design, achieving a 28.9% reduction in weight.Keywords
This publication has 10 references indexed in Scilit:
- Mechanical Properties and Ballistic Performance for Different Coatings on HARDOX 450 Steel for Defense ApplicationsCrystals, 2025
- FINITE ELEMENT ANALYSIS OF EXCAVATOR BUCKET DESIGN WITH BIOMIMETIC APPROACH WITH DIFFERENT STEELSKahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 2025
- Comparison of Abrasive Wear Resistance of Hardox Steel and Hadfield Cast SteelApplied Sciences, 2024
- BİR OTOMOBİL SALINCAĞININ TOPOLOJİ OPTİMİZASYONUUludağ University Journal of The Faculty of Engineering, 2024
- MECHANICAL SHAFT OPTIMIZATION: A STUDY ON STATIC STRUCTURAL ANALYSIS AND TOPOLOGICAL OPTIMIZATION IN ANSYSInternational Journal of 3D Printing Technologies and Digital Industry, 2023
- Optimization of Excavator Bucket Structure by a Coupled Simulation MethodApplied Sciences, 2023
- Numerical Investigation of Mixed Blade Structure in Radial FansDüzce Üniversitesi Bilim ve Teknoloji Dergisi, 2023
- Numerical Evaluation of Contemporary Excavator Bucket Designs using Finite Element AnalysisJurnal Kejuruteraan, 2021
- Numerical analysis of stresses in mine excavator bucketJournal of Mining Science, 2015
- Numerical-Experimental Analysis of Two Floor Platform Designs for Auxiliary Construction TruckExperimental Techniques, 2013