Torque ripple reduction in brushless DC motors by employing three-phase conduction mode drive
- 1 March 2026
- journal article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (3)
Abstract
In this article, this study aims to reduce torque ripple in a brushless direct current motor by employing a three-phase active mode voltage source inverter, and the torque ripple caused by commutation has been studied in detail. In this study, brushless direct current motors with two different pole numbers and central phase windings, which are frequently used in printing machines, were used. Nowadays, six-step two-phase winding active drives are used as brushless direct current motor (BLDC) drives. In conventional two-phase active mode drives, two phases are connected in series at any time, and the voltage at the ends of the phase windings is half that of the direct current source. In this proposed drive, the phase windings are connected in three different ways, creating a stepped-sinusoidal voltage across the phase windings. This voltage across the phase windings ensures that the current flowing through the phase windings is very close to a sinusoidal current. The closer the current flowing through the phase windings is to a sinusoidal current, the lower the torque ripple. Although the phase windings of the BLDC motors used in the study were centered type phase windings, phase currents were close to sinusoidal. The results from this experimental study showed that the torque ripple of the three-phase active mode drive was significantly reduced. In this work, the torque ripple was found to be 12% in two-phase conduction mode, while it was found to be 7% in three-phase conduction mode.Keywords
This publication has 15 references indexed in Scilit:
- Advanced reduction of torque ripple in BLDC motors using polynomial reference stator current generationThe International Journal of Advanced Manufacturing Technology, 2025
- A 12-Step Asynchronous PWM Scheme for High-Speed Brushless DC Drives With Commutation CompensationIEEE Transactions on Industrial Electronics, 2024
- Extended Operation of Brushless DC Motors Beyond 120° Under Maximum Torque Per Ampere ControlIEEE Transactions on Energy Conversion, 2023
- BLDC Motor Drives: A Single Hall Sensor Method and a 160° Commutation StrategyIEEE Transactions on Energy Conversion, 2020
- Increasing power and torque capability of brushless direct current motor by employing 150-degree conduction mode controlled three-phase voltage source inverterReview of Scientific Instruments, 2018
- Design, implementation, and application of 150-degree commutation VSI to improve speed range of sensored BLDC motorReview of Scientific Instruments, 2017
- A New Approach of Minimizing Commutation Torque Ripple for Brushless DC Motor Based on DC–DC ConverterIEEE Transactions on Industrial Electronics, 2009
- Sensorless Control of the BLDC Motors From Near-Zero to High SpeedsIEEE Transactions on Power Electronics, 2004
- Pulsating torque minimization techniques for permanent magnet AC motor drives-a reviewIEEE Transactions on Industrial Electronics, 1996
- Analysis of torque ripple due to phase commutation in brushless DC machinesIEEE Transactions on Industry Applications, 1992