MOMehmet Cihat Ozgenel

Mehmet Cihat Ozgenel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mehmet Cihat Ozgenel has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Condition Monitoring of Stator Winding Insulation in Rotating Electrical Machines: A Bibliometric and Comprehensive Analysis

    by Mehmet Cihat Özgenel, Emre Demirel

    Rotating electrical machines, as the basic components of modern industrial systems, play a critical role in the production and utilization of electrical energy. The reliability and efficiency of these machines largely depend on the condition of the stator winding insulation. Therefore, effective monitoring and evaluation of the stator winding insulation is of vital importance for the reliable and efficient operation of rotating electrical machines. This study presents a comprehensive bibliometric and conceptual analysis of conventional electrical test methods used in stator winding insulation condition monitoring methods in rotating electrical machines. The bibliometric analysis is performed using data obtained from the Web of Science (WoS) database. In this context, VOSviewer software is used to visualize the publication trends, citation patterns, collaboration networks and key concept relationships in the research area. In addition, this study contributes to a more accurate and comprehensive assessment of the stator winding insulation condition by systematically examining all relevant stator winding insulation condition monitoring methods. In this study, a comprehensive bibliometric analysis was performed to examine the scientific literature on the condition monitoring of stator winding insulation in rotating electrical machines. Data related to 111 publications identified on the Web of Science (WoS) platform were extracted into a text file for the purpose of performing the bibliometric analysis. As a result of the review, it was determined that in addition to traditional offline tests, partial discharge tests and versatile condition monitoring methods can provide more reliable results.

  • Torque ripple reduction in brushless DC motors by employing three-phase conduction mode drive

    by Mehmet Cihat Ozgenel

    In this article, this study aims to reduce torque ripple in a brushless direct current motor by employing a three-phase active mode voltage source inverter, and the torque ripple caused by commutation has been studied in detail. In this study, brushless direct current motors with two different pole numbers and central phase windings, which are frequently used in printing machines, were used. Nowadays, six-step two-phase winding active drives are used as brushless direct current motor (BLDC) drives. In conventional two-phase active mode drives, two phases are connected in series at any time, and the voltage at the ends of the phase windings is half that of the direct current source. In this proposed drive, the phase windings are connected in three different ways, creating a stepped-sinusoidal voltage across the phase windings. This voltage across the phase windings ensures that the current flowing through the phase windings is very close to a sinusoidal current. The closer the current flowing through the phase windings is to a sinusoidal current, the lower the torque ripple. Although the phase windings of the BLDC motors used in the study were centered type phase windings, phase currents were close to sinusoidal. The results from this experimental study showed that the torque ripple of the three-phase active mode drive was significantly reduced. In this work, the torque ripple was found to be 12% in two-phase conduction mode, while it was found to be 7% in three-phase conduction mode.


  • Enhanced soft-switched T-type neutral-point clamped (T-NPC) inverter with reduced component number

    by Mehmet Cihat Ozgenel, Naim Suleyman Ting, Yakup Sahin

    This paper presents an enhanced soft-switched T-type neutral-point clamped inverter featuring a compact active snubber cell that delivers zero-voltage transition turn-on and zero-voltage switching (ZVS) turn-off for the main switches, while auxiliary switches operate with zero-current switching turn-on and ZVS turn-off. Unlike prior designs, four auxiliary-path diodes are eliminated, reducing component count, conduction path length, and reverse-recovery losses, which in turn lowers cost, eases thermal management, and boosts power density. The proposed topology maintains full soft switching (SS) for all active devices without introducing additional voltage or current stress. The theoretical analysis of the inverter is clarified, and the operating modes for steady-state analysis are presented in detail. Experimental validation on a 400 V, 1 kW, and 100 kHz prototype demonstrates consistent SS across load conditions and a peak efficiency of 97.2%. The combination of higher efficiency, structural simplicity, and cost-effectiveness makes the proposed inverter a strong candidate for high-performance, compact T-type applications in renewable energy, and electric drive systems.

  • Design and Implementation of a Flyback-Assisted Wide-Range Fully Soft-Switched T-Type Inverter

    by Naim Suleyman Ting, Yakup Sahin, Mehmet Cihat Ozgenel

    A novel soft-switched three-level T-type inverter is proposed in this article. The proposed inverter provides turning- on by zero-voltage transition and turning- off by zero-voltage switching (ZVS) for main switches without any voltage or current stresses. The switching energies are transferred to the snubber capacitors, so the turning- off process of the main switches is improved by these snubber capacitors. Besides, the auxiliary switches are turned on by zero-current switching and turned off by ZVS. Furthermore, all snubber diodes are operated by soft-switching (SS), and the proposed SS snubber cell decreases the electromagnetic interference noises. The novel snubber cell has a simple structure, ease of application, common-ground switches, and low-cost features. The theoretical analysis of the inverter is clarified, and the operating modes for steady-state analysis are presented in detail. The experimental results rated 1-kW output power and 100-kHz switching frequency are provided to justify the theoretical analysis. The proposed unique snubber cell can be easily implemented in other three-level inverters, and the practice is demonstrated in the article.


  • Design, Producing and Testing of 12-Step Three-Phase Voltage Source Inverter with Flexible Independent PWM Current Control for Brushless Direct Current Motor

    by Mehmet Cihat Özgenel

    Brushless motors are used in wide areas in the industrial and domestic applications owing to their superior advantages over other type electric motors such as induction and brushed direct current motors. Owing to fact that the brushless direct current motors and their drivers are cheaper and easier to design than drives of permanent magnet synchronous motors, brushless direct current motors are preferred a large application areas. But BLDC motor drivers are still run classical three-phase six-step inverter. Because of that the BLDC motors are run classical three-phase six-step inverter, the BLDC motor does not show its real dynamic performance. If BLDC motor is run via 12-step inverter, it gives a better dynamic performance than that of six-step inverter. The aim of this study, to manufacture 12-step inverter which controls phase currents using pulse width modulation (PWM) technique and to analyze the dynamic performance of BLDC motor running under purposed 12-step inverter. In the 12-step inverter, two or three transistors are on conduction mode at each time interval alternatively and in order to keep switching losses minimum only one transistor runs PWM mode in this study. The experimental results show that purposed flexible independent PWM 12-step inverter works perfectly and this proposed inverter provides the BLDC motor generating high dynamic performance than that of six-step one.

  • Analysis of the Effects of Three Various Current Control Methods on BLDC Motors

    by Mehmet Cihat Özgenel

    BLDC motorlar üstün özelliklerinden dolayı geniş bir uygulama alanında çok popüler motorlar olmuşlardır. Fırçasız motorlar ev, robotik, ofis makineleri, tıbbi, askeri ve uzay uygulamalarında, insansız hava araçlarında bu uygulamalardaki ihtiyaçları karşıladıkları için tercih edilirler. BLDC motorlar yüksek verim, hızlı dinamik cevap, lineer hız-moment karakteristiği ve yüksek hacim moment oranına sahiptirler. BLDC motorlarda hız ayarı PWM tekniği ile yapılır. Farklı PWM metotları BLDC motorlar için uygulanmaktadır. Bu PWM metotların üstünlükleri ve mahsurlu yanları bulunmaktadır. Bu çalışmada çok kullanılan üç değişik PWM metodu incelenmiştir. Bu metotlar; tam iletim modu, bağımsız PWM modu ve tamamlayıcı PWM modu metotlarıdır. Bu amaç için üç inverter ön sürücüsü tasarlanmış ve gerçekleştirilmiş ve metotların BLDC motor üzerindeki etkileri incelenmiştir. Tamamlayıcı PWM modlu inverterin FDAM’una hızlı bir dinamik tepki kazandırdığı görülmüştür. Tam iletim modu ile çalışan inverterin doğru akım kaynağından daha yüksek akım çekmektedir. Bağımsız PWM modlu inverterin performansının tamamlayıcı modlu inverterin performansına yakın olduğu görülmüştür.


  • Increasing power and torque capability of brushless direct current motor by employing 150-degree conduction mode controlled three-phase voltage source inverter

    by Mehmet Cihat Ozgenel

    With the reduction of magnet costs and the production of high-energy magnets in small sizes, permanent magnet brushless motors are used widely in various applications from household to medical, industrial, and automation applications. Furthermore, permanent magnet brushless motors have some significant advantages over the other conventional motors such as induction and brushed motors. Due to the popularity of brushless motors, they have become the focus of interest of researchers. From the past 30 years to today, the researchers have carried out numerous studies in relation to brushless motors. These studies are generally sensorless control, adaptive control, different Proportional Integral and Derivate (PID) applications, fuzzy control, PI-fuzzy and PID-fuzzy control and different Pulse Width Modulation applications and to eliminate torque ripple and other control algorithms. Permanent magnet brushless motors can be divided into two main groups. One is the permanent magnet synchronous motor and the other one is the permanent magnet brushless direct current motor (BLDCM). BLDC motors are the most preferred in applications due to their low cost and relatively simple drivers. BLDC motors are run with the classical 120-degree conduction mode voltage source inverter (VSI). Because BLDC motors run with 120-degree conduction mode inverters, power and torque produced by BLDC motors are less than their capacity, whereas BLDC motors can provide a better dynamic response, higher power, and torque by employing 150-degree conduction mode controlled VSI. In this experimental study, it is aimed to design and manufacture a versatile VSI which can control the BLDC motor in both 120 and 150–degree conduction modes. Then, BLDC motor is run in two conduction modes employing the purposed inverter under various loads, and the torque, power, and speed performance of the motor were analyzed to demonstrate the effect of the two commutation methods on BLDC motor performance. The results of this comparative experimental study have shown that the 150-degree conduction mode-controlled inverter provides with the BLDC motor generating higher power, torque, and speed than the inverter with 120-degree conduction mode.


  • Design, implementation, and application of 150-degree commutation VSI to improve speed range of sensored BLDC motor

    by Mehmet Cihat Ozgenel

    Permanent magnet brushless dc (BLDC) motors are very convenient for many applications such as industrial, medical, robotic, aerospace, small electric vehicles, and home applications because of their inherent satisfying dynamic characteristics. There are numerous studies about these motors and their control schemes such as sensorless control and different speed and torque control schemes. All electric motors need commutation in order to produce speed and torque. Commutation in brushed DC motors is performed by means of a brush and collector. In BLDC motors, commutation is provided electronically in contrast to the brushed dc motors. In BLDC motors, motor phase windings are energized according to the information of the rotor position by inverter transistors. Rotor position information is used for commutation. Therefore, rotor position information is required to produce speed and torque for BLDC motors. The easiest and cheapest way to obtain rotor position information is to use Hall-effect or optical sensors. BLDC motor manufacturers generally produce BLDC motors equipped with three Hall-effect position sensors. Having three position sensors on BLDC motors provides six-step commutation which ensures two phase windings are energized in each moment. The third phase is empty. In this study, all phase windings are energized in the same time. This commutation method is twelve-step or 150 degrees commutation. So that more speed can be achieved from the same BLDC motor by comparison with six-step commutation. In this paper, both six-step and twelve-step commutation methods applied to the same BLDC motor and obtained experimental results from this study were presented, examined, and discussed.


  • Design and application of a novel high precision and low cost electronic tachogenerator for sensor-based brushless direct current motor drivers

    by Mehmet Cihat Ozgenel, Gungor Bal, Durmus Uygun

    This study presents a precise speed control method for Brushless Direct Current (BLDC) Motors using an electronic tachogenerator (ETg) instead of an electro-mechanical tachogenerator. Most commonly used three-phase BLDC motors have three position sensors for rotor position data to provide commutation among stator windings. Aforementioned position sensors are usually Hall-effect sensors delivering binary-high and binary-low data as long as the motor rotates. These binary sets from three Hall-effect sensors can be used as an analogue rotor speed signal for closed loop applications. Each position sensor signal is apart from 120 electrical degrees. By using an electronic circuitry, a combination of position sensor signals is converted to the analogue signal providing an input to a PI speed controller. To implement this, a frequency to voltage converter has been used in this study. Then, the analogue speed signal has been evaluated as rotor speed data in comparison with the reference speed. So, an ETg system has been successfully achieved in place of an electro-mechanical tachogenerator for BLDC motor speed control. The proposed ETg has been tested under various speed conditions on an experimental setup. Employed tests and obtained results show that the proposed low-cost speed feedback sub-system can be effectively used in BLDC motor drive systems. Through the proved method and designed sub-system, a new motor controller chip with a speed feedback capability has been aimed.