Thermal spray to embed optical fibers for the monitoring and protection of metallic structures
Open Access
- 4 July 2024
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (27) , 12812-12829
Abstract
In the framework of using fiber optics (FO) for structural health monitoring, a true challenge is to fix the fiber onto structures guaranteeing both protection for the former and an effective adhesion on the latter. This work proposes a method to obtain such result via thermal spray technique on metallic structures, allowing its use in the most severe conditions of corrosion and wear. Since the transmission medium between the structure and the sensitive part of the optical fiber is represented by the fiber coating, three differently coated fibers were used on C-40 steel substrate: polyacrylate, polyimide and ORMOCER. In addition, the use of a primer to improve the bond on the substrate was evaluated. The adhesion between FO and metallic coating is evaluated through optical microscopy (OM) and scanning electrons microscopy (SEM) analysis. The functionality is also verified with both thermal and mechanical tests to calibrate the measuring accuracy. The results indicate that the best combination is that of the polyimide fiber, a zinc primer and aluminum coating. The proven qualities are the adhesion at the interface between the metallic coating and the fiber optics, and the preservation of the structural integrity of the fiber itself and its coating, and a precise measurement of strain acquired by fiber Bragg grating sensors (FBGs). The use of the thermal spray process is thus proved to be a solution for the optical fiber and substrate interaction, since it preserves the integrity of the optical fiber, due to the low temperature of the process, adding the protection that the metallic coating offers as well.Keywords
Funding Information
- Politecnico di Milano
This publication has 32 references indexed in Scilit:
- Role of Thermal Spray Coatings on Erosion, Corrosion, and Oxidation in Various Applications: A ReviewJournal of Bio- and Tribo-Corrosion, 2024
- Embedding optical fiber with laser metal depositionProgress in Additive Manufacturing, 2024
- Integrating fiber optic sensors into metallic components for sensing in harsh environmentsOptics & Laser Technology, 2023
- A review on coatings through thermal sprayingChemical Papers, 2023
- Thermal Spray Fundamentals2021
- Spatial Strain Sensing Using Embedded Fiber OpticsJOM, 2019
- Solid-state additive manufacturing and repairing by cold spraying: A reviewJournal of Materials Science & Technology, 2018
- Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive ManufacturingJOM, 2017
- Solid-state additive manufacturing for metallized optical fiber integrationComposites Part A: Applied Science and Manufacturing, 2015
- Fibre optics health monitoring for aeronautical applicationsMeccanica, 2015