Daniela Rigamonti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Daniela Rigamonti has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Paolo Bettini
Department of Aerospace Science and Technology, Politecnico di Milano, Milan, Italy
5 shared publications - Antonio Mattia Grande
Department of Aerospace Science and Technology, Politecnico di Milano, Milan, Italy
3 shared publications - Adelaide Nespoli
Consiglio Nazionale delle Ricerche—Istituto di Chimica della Materia Condensata e di Tecnologie per l’Energia (CNR-ICMATE), via G. Previati 1/e, 23900 Lecco, Italy
2 shared publications - Elena Villa
CNR ICMATE, Lecco Unit, 23900 Lecco, Italy
2 shared publications - Francesca Passaretti
CNR ICMATE, Lecco Unit, 23900 Lecco, Italy
2 shared publications - Francesca Spini
Department of Aerospace Science and Technology, Politecnico di Milano, Milan, Italy
2 shared publications
Latest Publications
- 30 December 2025
- Published by SAGE Publications in Structural Health Monitoring
Turning aeronautical brackets into smart monitoring devices: integration of sensors and load identification algorithms
In this work, a metallic additive manufactured bracket sensorized with optical fibres was developed with the capability of identifying the applied load magnitude and orientation. Additive manufacturing technology was exploited for the integration of sensors, exploring the possibility of producing internal and external channels for the housing of the optical fibres endowed with fibre Bragg gratings for strain and temperature sensing. The strain transfer between the metallic element and the sensors was studied numerically and experimentally, embedding the fibres into composite patches, co-bonded to the metallic element. A flap track support was selected as application scenario, which was printed in titanium alloy by selective laser melting. A two-step load identification method based on strain sensing was devised. The first model-based step adopts a notional finite element model for the extraction of the influence functions linking applied loads and local strains. The second step is a data-based correction procedure, which involves a limited number of calibration tests on the physical element and the identification of correction factors for the influence functions by means of a genetic algorithm. The description of the algorithm and a first validation by means of virtual tests is presented in detail. A demonstrator of the sensorized bracket was manufactured, proving experimentally the possibility of identifying the loads in conditions different from those used for the data-based correction. Overall, the study provides the methods for designing multifunctional structural connections that integrates structural and load monitoring roles and can be assembled into structures without modifying the conventional manufacturing procedures.
- 30 December 2025
- Published by SAGE Publications in Structural Health Monitoring
Turning aeronautical brackets into smart monitoring devices: integration of sensors and load identification algorithms
In this work, a metallic additive manufactured bracket sensorized with optical fibres was developed with the capability of identifying the applied load magnitude and orientation. Additive manufacturing technology was exploited for the integration of sensors, exploring the possibility of producing internal and external channels for the housing of the optical fibres endowed with fibre Bragg gratings for strain and temperature sensing. The strain transfer between the metallic element and the sensors was studied numerically and experimentally, embedding the fibres into composite patches, co-bonded to the metallic element. A flap track support was selected as application scenario, which was printed in titanium alloy by selective laser melting. A two-step load identification method based on strain sensing was devised. The first model-based step adopts a notional finite element model for the extraction of the influence functions linking applied loads and local strains. The second step is a data-based correction procedure, which involves a limited number of calibration tests on the physical element and the identification of correction factors for the influence functions by means of a genetic algorithm. The description of the algorithm and a first validation by means of virtual tests is presented in detail. A demonstrator of the sensorized bracket was manufactured, proving experimentally the possibility of identifying the loads in conditions different from those used for the data-based correction. Overall, the study provides the methods for designing multifunctional structural connections that integrates structural and load monitoring roles and can be assembled into structures without modifying the conventional manufacturing procedures.
- Open Access
Shape Memory Alloy Torsional Actuators Enabling Autonomous Thermal Control in Small Satellites
The aim of this study is to investigate the integration of Shape Memory Alloy (SMA) torque tubes into SmallSats’ thermal management systems to passively deploy radiator panels in an autonomous manner. Specific aspects of the investigation are related to material production, thermomechanical characterization, structural integration, and assessment of overall prototype functionalities. Implementation feasibility was evaluated through a 12U CubeSat test case. Starting with NiTi tubes ( at Ni.) intended for pseudoelastic applications, a combined aging and shape-setting heat treatment process was selected to achieve both SME characteristics and an S-shaped geometric configuration. Comprehensive material characterization was conducted using differential scanning calorimetry (DSC) and mechanical testing to evaluate post-treatment phase transformation temperatures (PTTs) and torsional load response. Experimental results demonstrated the actuator’s capacity to fully recover imposed rotations exceeding ° against resisting torques up to 0.1 Nm. Material cyclic stability analysis revealed rapid stabilization after four cycles, with maintained performance through 80 cycles. The experimental validation culminated in benchtop prototype testing, which achieved an ° deployment rotation, evidencing the viability of the proposed mechanism.Open AccessShape Memory Alloy Torsional Actuators Enabling Autonomous Thermal Control in Small Satellites
The aim of this study is to investigate the integration of Shape Memory Alloy (SMA) torque tubes into SmallSats’ thermal management systems to passively deploy radiator panels in an autonomous manner. Specific aspects of the investigation are related to material production, thermomechanical characterization, structural integration, and assessment of overall prototype functionalities. Implementation feasibility was evaluated through a 12U CubeSat test case. Starting with NiTi tubes ( at Ni.) intended for pseudoelastic applications, a combined aging and shape-setting heat treatment process was selected to achieve both SME characteristics and an S-shaped geometric configuration. Comprehensive material characterization was conducted using differential scanning calorimetry (DSC) and mechanical testing to evaluate post-treatment phase transformation temperatures (PTTs) and torsional load response. Experimental results demonstrated the actuator’s capacity to fully recover imposed rotations exceeding ° against resisting torques up to 0.1 Nm. Material cyclic stability analysis revealed rapid stabilization after four cycles, with maintained performance through 80 cycles. The experimental validation culminated in benchtop prototype testing, which achieved an ° deployment rotation, evidencing the viability of the proposed mechanism. - Open Access
- 4 July 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (27) , 12812-12829
Thermal spray to embed optical fibers for the monitoring and protection of metallic structures
In the framework of using fiber optics (FO) for structural health monitoring, a true challenge is to fix the fiber onto structures guaranteeing both protection for the former and an effective adhesion on the latter. This work proposes a method to obtain such result via thermal spray technique on metallic structures, allowing its use in the most severe conditions of corrosion and wear. Since the transmission medium between the structure and the sensitive part of the optical fiber is represented by the fiber coating, three differently coated fibers were used on C-40 steel substrate: polyacrylate, polyimide and ORMOCER. In addition, the use of a primer to improve the bond on the substrate was evaluated. The adhesion between FO and metallic coating is evaluated through optical microscopy (OM) and scanning electrons microscopy (SEM) analysis. The functionality is also verified with both thermal and mechanical tests to calibrate the measuring accuracy. The results indicate that the best combination is that of the polyimide fiber, a zinc primer and aluminum coating. The proven qualities are the adhesion at the interface between the metallic coating and the fiber optics, and the preservation of the structural integrity of the fiber itself and its coating, and a precise measurement of strain acquired by fiber Bragg grating sensors (FBGs). The use of the thermal spray process is thus proved to be a solution for the optical fiber and substrate interaction, since it preserves the integrity of the optical fiber, due to the low temperature of the process, adding the protection that the metallic coating offers as well.
- 4 July 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (27) , 12812-12829
Open AccessThermal spray to embed optical fibers for the monitoring and protection of metallic structures
In the framework of using fiber optics (FO) for structural health monitoring, a true challenge is to fix the fiber onto structures guaranteeing both protection for the former and an effective adhesion on the latter. This work proposes a method to obtain such result via thermal spray technique on metallic structures, allowing its use in the most severe conditions of corrosion and wear. Since the transmission medium between the structure and the sensitive part of the optical fiber is represented by the fiber coating, three differently coated fibers were used on C-40 steel substrate: polyacrylate, polyimide and ORMOCER. In addition, the use of a primer to improve the bond on the substrate was evaluated. The adhesion between FO and metallic coating is evaluated through optical microscopy (OM) and scanning electrons microscopy (SEM) analysis. The functionality is also verified with both thermal and mechanical tests to calibrate the measuring accuracy. The results indicate that the best combination is that of the polyimide fiber, a zinc primer and aluminum coating. The proven qualities are the adhesion at the interface between the metallic coating and the fiber optics, and the preservation of the structural integrity of the fiber itself and its coating, and a precise measurement of strain acquired by fiber Bragg grating sensors (FBGs). The use of the thermal spray process is thus proved to be a solution for the optical fiber and substrate interaction, since it preserves the integrity of the optical fiber, due to the low temperature of the process, adding the protection that the metallic coating offers as well.
- Open Access
- 18 December 2023
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 19 (1) , 016011
Hingeless arm for space robotics actuated through shape memory alloys
Operating outside the spacecraft via remotely controlled structures is an important opportunity in different space applications. The research in this area is focused on designing robots that are sufficiently flexible to allow inspection in locations where access is difficult or impossible for astronauts, while minimizing weight and bulk. The purpose of the research is to design a borescope for space applications with no hinges or other mechanisms, exploiting biomimetic design concepts. This is pursued by giving to the borescope a backbone exoskeleton provided by a continuous structure made of fibre reinforced composite material and using NiTi wires as tendons, taking advantage of their low weight and dimensions, which allow them to be embedded between the composite layers during the lamination process. After a study of the state of the art of flexible structures, concentrated in the medical and robotic fields, the research work unfolded in two phases. In the first design phase, several composite layup solutions were considered and analysed using finite element models, leading to the definition of the borescope geometrical parameters and to an initial estimate of the displacements that can be achieved. In the second experimental phase, seven prototypes were produced and tested, with one or more wires, to validate the design and to search for a configuration that can be actuated in different directions. The borescope prototypes resulted flexible enough to achieve an extended degree of bending and at the same time sufficiently rigid to allow complete rearm of the NiTi wires. The numerical and experimental study led to the definition of the design parameters, the number of wires, and the manufacturing technique to integrate NiTi actuators.
- 18 December 2023
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 19 (1) , 016011
Open AccessHingeless arm for space robotics actuated through shape memory alloys
Operating outside the spacecraft via remotely controlled structures is an important opportunity in different space applications. The research in this area is focused on designing robots that are sufficiently flexible to allow inspection in locations where access is difficult or impossible for astronauts, while minimizing weight and bulk. The purpose of the research is to design a borescope for space applications with no hinges or other mechanisms, exploiting biomimetic design concepts. This is pursued by giving to the borescope a backbone exoskeleton provided by a continuous structure made of fibre reinforced composite material and using NiTi wires as tendons, taking advantage of their low weight and dimensions, which allow them to be embedded between the composite layers during the lamination process. After a study of the state of the art of flexible structures, concentrated in the medical and robotic fields, the research work unfolded in two phases. In the first design phase, several composite layup solutions were considered and analysed using finite element models, leading to the definition of the borescope geometrical parameters and to an initial estimate of the displacements that can be achieved. In the second experimental phase, seven prototypes were produced and tested, with one or more wires, to validate the design and to search for a configuration that can be actuated in different directions. The borescope prototypes resulted flexible enough to achieve an extended degree of bending and at the same time sufficiently rigid to allow complete rearm of the NiTi wires. The numerical and experimental study led to the definition of the design parameters, the number of wires, and the manufacturing technique to integrate NiTi actuators.
- Open Access
- 1 November 2023
- Published by Materials Research Forum, LLC in Materials Research Proceedings
- Vol. 37
Deployment of a CubeSat radiative surface through an autonomous torsional SMA actuator
Deployment of a CubeSat radiative surface through an autonomous torsional SMA actuator Filippo Carnier, Alberto Riccardo Donati, Elena Villa, Daniela Rigamo
- 1 November 2023
- Published by Materials Research Forum, LLC in Materials Research Proceedings
- Vol. 37
Open AccessDeployment of a CubeSat radiative surface through an autonomous torsional SMA actuator
Deployment of a CubeSat radiative surface through an autonomous torsional SMA actuator Filippo Carnier, Alberto Riccardo Donati, Elena Villa, Daniela Rigamo
- Open Access
- 28 February 2023
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 126 (1-2) , 519-530
Damping property of a NiTi auxetic structure fabricated through selective laser melting
The present work aims at studying the damping response of a NiTi auxetic structure fabricated through additive manufacturing. Furthermore, an electropolishing route has been accounted for improving the roughness on the external surface of the printed samples. The damping capacity of the manufactured auxetic NiTi components is evaluated through the amount of energy dissipated per cycle and through the loss factor index. Results show that the damping capacity of the auxetic NiTi cell takes advantage of electropolishing and it is superior to that of traditional materials. Particularly, a maximum dissipated energy of 55 mJ was registered in the austenite state after 10 min of electropolishing; additionally, the loss factor shows a maximum of 0.0523 in the R-phase.
- 28 February 2023
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 126 (1-2) , 519-530
Open AccessDamping property of a NiTi auxetic structure fabricated through selective laser melting
The present work aims at studying the damping response of a NiTi auxetic structure fabricated through additive manufacturing. Furthermore, an electropolishing route has been accounted for improving the roughness on the external surface of the printed samples. The damping capacity of the manufactured auxetic NiTi components is evaluated through the amount of energy dissipated per cycle and through the loss factor index. Results show that the damping capacity of the auxetic NiTi cell takes advantage of electropolishing and it is superior to that of traditional materials. Particularly, a maximum dissipated energy of 55 mJ was registered in the austenite state after 10 min of electropolishing; additionally, the loss factor shows a maximum of 0.0523 in the R-phase.
- 2 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (3) , 3020-3027
Thin Membranes Based on FBG Sensors for Real-Time Subbandage Pressure Monitoring
This work focuses on the manufacturing and testing of a new device for medical bandages monitoring. An excessive pressure exerted from the compression bandage can block the blood flow of the patient, causing different medical complications to skin, nerves and to the circulatory system. On the contrary, if the pressure applied is low, the therapy is not effective. The utility therefore arises of a device capable of quantitatively indicating the correct adjustment of the bandage. The technological demonstrators developed consist of a polyurethane elastomeric shell with a thin composite supporting core. Fiber Bragg Grating Sensors (FBGS) embedded within this core permit the detection of the sub-bandage pressure applied during compression therapy. The two prototypes were applied under arm bandages to evaluate their capability to transmit the applied pressure to the embedded FBGS. We demonstrated the ability to monitor the bandaging action measuring the level of pressure exerted with the rounds of bandages. Moreover, the thin membranes permit the monitoring of the heartbeat of the patient, giving feedback about blood irroration. The device developed is therefore promising to improve the results of compression therapy.
- 2 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (3) , 3020-3027
Thin Membranes Based on FBG Sensors for Real-Time Subbandage Pressure Monitoring
This work focuses on the manufacturing and testing of a new device for medical bandages monitoring. An excessive pressure exerted from the compression bandage can block the blood flow of the patient, causing different medical complications to skin, nerves and to the circulatory system. On the contrary, if the pressure applied is low, the therapy is not effective. The utility therefore arises of a device capable of quantitatively indicating the correct adjustment of the bandage. The technological demonstrators developed consist of a polyurethane elastomeric shell with a thin composite supporting core. Fiber Bragg Grating Sensors (FBGS) embedded within this core permit the detection of the sub-bandage pressure applied during compression therapy. The two prototypes were applied under arm bandages to evaluate their capability to transmit the applied pressure to the embedded FBGS. We demonstrated the ability to monitor the bandaging action measuring the level of pressure exerted with the rounds of bandages. Moreover, the thin membranes permit the monitoring of the heartbeat of the patient, giving feedback about blood irroration. The device developed is therefore promising to improve the results of compression therapy.
- 22 June 2022
- Published by Springer Nature
- p. 921-932
Enabling FO-Based HUMS Applications Through an Innovative Integration Technique: Application to a Rotor Blade Mockup
- 22 June 2022
- Published by Springer Nature
- p. 921-932
Enabling FO-Based HUMS Applications Through an Innovative Integration Technique: Application to a Rotor Blade Mockup
- 22 June 2022
- Published by Springer Nature
- p. 933-942
An Integrated Fiber Optic Based SHM System for Structural Composite Components: Application to a Racing Motorbike Fork
- 22 June 2022
- Published by Springer Nature
- p. 933-942
An Integrated Fiber Optic Based SHM System for Structural Composite Components: Application to a Racing Motorbike Fork
- 22 June 2022
- Published by Springer Nature
- p. 912-920
Thin Membrane with “Human Touch” Sensitivity: Body Pressure and Temperature Measurements with Optical Fiber Sensors
- 22 June 2022
- Published by Springer Nature
- p. 912-920
Thin Membrane with “Human Touch” Sensitivity: Body Pressure and Temperature Measurements with Optical Fiber Sensors