Effects of Overlap Length on Flammability and Fire Hazard of Vertical Polymethyl Methacrylate (PMMA) Plate Array
Open Access
Abstract
Polymethyl methacrylate (PMMA) plates are widely used in buildings or factories for natural lighting. Commonly PMMA plates are installed as a discrete array. However, PMMA plates are very susceptible to fire. Therefore, experimental study on flammability and fire hazard of vertical PMMA plate array with different overlap length (D) was conducted in this work. The average flame height () increases first and then decreases with an increase in the overlap length, and reaches the maximum when D = 40 mm. The discrete flame spread speed () also rises first and then drops with the increase of D, which is mainly due to the heat transfer from the PMMA flame to the next plate. A model for predicting the flame spread rate of discrete PMMA array is established. The predicted results are consistent with experimental ones, with a predicted error smaller than 15%. The average temperature of flame zone rises first and then drops as D increases, reaching the maximum when D = 40 mm. This leads to the same changing trend of radiative heat flux. Results obtained in this work provide a reference for fire hazard evaluation and fire safety design of PMMA plates employed in buildings or industrial sites.
Keywords
Funding Information
- National Natural Science Foundation of China (No.51974298)
- National Key R&D Program of China (2018YFC0808100, 2016YFC0802907)
- The Independent research project of State Key Laboratory of Coal Resources and Safe Mining, CUMT (SKLCRSM2020X03)
This publication has 31 references indexed in Scilit:
- Influence of Long-Term Storage on Shape Memory Performance and Mechanical Behavior of Pre-stretched Commercial Poly(methyl methacrylate) (PMMA)Polymers, 2019
- Flame suppression of 100 nm PMMA dust explosion by KHCO3 with different particle sizeProcess Safety and Environmental Protection, 2019
- Experimental study for flame base drag and burning efficiency of spilled crude oil during in-situ burning on waterProcess Safety and Environmental Protection, 2019
- Fluoroalkyl POSS with Dual Functional Groups as a Molecular Filler for Lowering Refractive Indices and Improving Thermomechanical Properties of PMMAPolymers, 2018
- Experimental Studies on the Effects of Spacing on Upward Flame Spread over Thin PMMAFire Technology, 2016
- Effect of finite dimension on downward flame spread over PMMA slabs: Experimental and theoretical studyInternational Journal of Heat and Mass Transfer, 2015
- Experimental study of upward flame spread of an inclined fuel surfaceProceedings of the Combustion Institute, 2013
- Slope effect on laboratory fire spread: contribution of radiation and convection to fuel bed preheatingInternational Journal of Wildland Fire, 2011
- Width effect on upward flame spreadFire Safety Journal, 2009
- Width effects on the early stage of upward flame spread over PMMA slabs: Experimental observationsFire Safety Journal, 2009