Increasing the stability of LiMn2O4 electrodes under high-current-density conditions via SoC control in an electrochemical lithium recovery system
Authors:
- 15 December 2023
- journal article
- research article
- Published by Korean Society of Environmental Engineering in Environmental Engineering Research
- Vol. 29 (4) , 230677
Abstract
For efficient lithium recovery, the electrochemical lithium recovery (ELR) process that uses LiMn2O4 (LMO) electrodes with selectivity for lithium ions, has been introduced. The electrochemical system is environmentally friendly and allows for the recovery of lithium at a high yield, but the issue of manganese dissolution in LMO electrodes, decreasing their stability, remains to be solved. Herein, we suggest a solution to the existing problem through a rapid lithium recovery method that also enhances the stability of LMO electrodes through the state-of-charge (SoC) control approach. The retained discharge capacity of the system with a high current density (0.4 A/g) remains at 99.2% at 60% SoC after 300 cycles. Compared to the results under full charge/discharge operation (44.2% after 300 cycles), the proposed method demonstrates the state-of-charge (SoC) control adjustments at high current density levels to enhance the recovery rate and stability of the electrode. Additionally, high lithium-ion selectivity with a similar recovery rate is maintained at a high current density under 60% SoC operation compared to 100% SoC in lithium recovery tests. These results indicate that the SoC control strategy can increase the efficiency of ELR by improving the stability of the electrode under high-rate operational conditions.Keywords
Funding Information
- Samsung Electronics Co., Ltd. (IO221220-04278-01)
- Hongik University
This publication has 46 references indexed in Scilit:
- Porous LiMn2O4 as cathode material with high power and excellent cycling for aqueous rechargeable lithium batteriesEnergy & Environmental Science, 2011
- The Lithium future—resources, recycling, and the environmentConservation Letters, 2011
- Membrane capacitive deionizationJournal of Membrane Science, 2010
- Synthesis of spinel-type lithium antimony manganese oxides and their Li+ extraction/ion insertion reactionsJournal of Materials Chemistry, 2000
- Lattice Dynamics and Vibrational Spectra of Lithium Manganese Oxides: A Computer Simulation and Spectroscopic StudyThe Journal of Physical Chemistry B, 1999
- Mechanism of the Electrochemical Insertion of Lithium into LiMn2 O 4 SpinelsJournal of the Electrochemical Society, 1998
- Lithium(1+) and magnesium(2+) extraction and lithium(1+) insertion reactions with lithium magnesium manganese oxide (LiMg0.5Mn1.5O4) spinel in the aqueous phaseChemistry of Materials, 1993
- Lithium(1+) extraction/insertion with spinel-type lithium manganese oxides. Characterization of redox-type and ion-exchange-type sitesLangmuir, 1992
- Selective electroinsertion of lithium ions into a platinum/.lambda.-manganese dioxide electrode in the aqueous phaseLangmuir, 1991
- Mechanism of lithium(1+) insertion in spinel-type manganese oxide. Redox and ion-exchange reactionsLangmuir, 1991