Surface shape development of the pitch lap under the loading of the conditioner in continuous polishing process
- 28 October 2018
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 102 (6) , 3129-3140
Abstract
Continuous polishing using the pitch lap is a key process in finishing large flat optical elements. The optical elements’ surface figure is primarily dependent on the surface shape of the pitch lap, which is controlled by a large‐size conditioner. However, underlying fundamentals of the process control is not yet clear, and it remains empirical and nondeterministic to date. In this study, a novel analysis model is proposed for exploring the surface shape development of the pitch lap under the conditioner loading. The analysis model divides the polishing time into a series of segments, in which the shape variation of the pitch lap due to viscoelastic creep is derived from the pressure distribution at the conditioner‐lap contact interface. Further, a contact model of the lap and conditioner is built to obtain the pressure distribution at the interface, and a novel creep model is proposed for the viscoelastic behavior of the pitch lap under the pressure. The analysis model combined with the contact and viscoelastic models can be used to explore the pitch lap shape development under various conditions and hence reveal the underlying fundamentals of controlling the lap shape by the conditioner.Keywords
Funding Information
- Science Challenge Project (JCKY2016212A506-0501)
- Important National Science and Technology Specific Projects (2017ZX04022001-101)
This publication has 17 references indexed in Scilit:
- Unexpected viscoelastic deformation of tight sandstone: Insights and predictions from the fractional Maxwell modelScientific Reports, 2017
- Material removal characteristics of full aperture optical polishing processMachining Science and Technology, 2017
- Characterization of the Polishing‐Induced Contamination of Fused Silica OpticsJournal of the American Ceramic Society, 2016
- Experimental Investigation of Material Removal and Surface Roughness during Optical Glass PolishingMaterials and Manufacturing Processes, 2016
- Full Aperture Optical Polishing Process: Overview and Challenges2016
- Mechanistic study of continuous polishingHigh Power Laser Science and Engineering, 2015
- Chemistry and Formation of the Beilby Layer During Polishing of Fused Silica GlassJournal of the American Ceramic Society, 2015
- Influence of Temperature and Material Deposit on Material Removal Uniformity during Optical Pad PolishingJournal of the American Ceramic Society, 2014
- The influence of process vibrations on precision polishing metricsCIRP Annals, 2012
- Toward Deterministic Material Removal and Surface Figure During Fused Silica Pad PolishingJournal of the American Ceramic Society, 2010