Synergetic Optimization and In Situ Fabrication of Thin-Film Heat Flux Sensor for Heat Flux Measurement of Combustion Wind Tunnel
- 3 April 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Abstract
Instantaneous heat flux monitoring of high-temperature components in extreme environments is gaining significant attention for aircraft engines. Recently, advancements in microfabrication techniques have enabled the development of thin-film heat flux sensors (TFHFSs). However, fabricating TFHFS on complex aeroengine components, especially in narrow spaces, remains a significant challenge. In this work, the influence of geometric parameters on the sensor’s physical properties is systematically investigated using numerical simulation methods. Then, a high-temperature Pt/PtRh thermopile TFHFS is fabricated on the Ni-based turbine blade. Experimental results indicate that the proposed TFHFS exhibits a high sensitivity of 19.38 $\mu $ V/(kW/m2) and a response time of approximately 21 ms. Notably, the TFHFS has a nearly constant response in three-cycle tests and exhibits excellent repeatability and stability. Furthermore, the high-temperature combustion wind tunnel test confirms that the TFHFS can operate up to $1000~^{\circ }$ C and withstand a gas flow velocity of 0.9 Mach, indicating that the fabricated TFHFS is suitable for extremely hostile and complex environment measurement applications. This study provides a viable approach for developing various thin-film sensors on complex surfaces and promotes in situ sensing toward practical applications.
Keywords
This publication has 50 references indexed in Scilit:
- Piezoelectric-pneumatic material jetting printing for non-contact conformal fabrication of high-temperature thick-film sensorsAdditive Manufacturing, 2024
- Design and performance evaluation of a novel thin-film heat flux sensorCase Studies in Thermal Engineering, 2023
- Ultrafast high-temperature sintering of polymer-derived ceramic nanocomposites for high-temperature thin-film sensorsChemical Engineering Journal, 2023
- High temperature protection performance of sandwich structure Al2O3/Si3N4/YAlO multilayer films for Pt–Pt10%Rh thin film thermocouplesCeramics International, 2022
- High-temperature electrical properties of polymer-derived ceramic SiBCN thin films fabricated by direct writingCeramics International, 2022
- Effects of fueling distance on combustion stabilization modes in a cavity-based scramjet combustorActa Astronautica, 2019
- Investigation of combustion process of a kerosene fueled combustor with air throttlingCombustion and Flame, 2017
- Techniques for measurement of heat flux in furnace waterwalls of boilers and prediction of heat flux – A reviewApplied Thermal Engineering, 2016
- Theoretical development of a new surface heat flux calibration method for thin-film resistive temperature gauges and co-axial thermocouplesShock Waves, 2012
- Infrared thermography for convective heat transfer measurementsExperiments in Fluids, 2010