Effects of Downstream Vortex Generators on Film Cooling a Flat Plate Fed by Crossflow
- 16 January 2024
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 146 (5) , 1-39
Abstract
Counter-rotating vortices, formed by the interaction of film-cooling jets and the hot gas flow, adversely affect the performance of conventional film-cooling designs. Downstream vortex generators have been shown to improve cooling effectiveness by mitigating the effects of the counter-rotating vortices and by deflecting the cooling jet laterally. In this study, computational and experimental methods were used to examine how cylindrical film-cooling holes (D = 3.2 mm, L/D = 6, p/D = 3, α = 30 deg) with and without downstream vortex generators perform when the coolant supply channel is perpendicular to the direction of the hot gas. For this study, the hot gas had a temperature of 650 K and an average Mach number of 0.23. The hot-gas-to-coolant temperature ratio was 1.9, and two blowing ratios (0.75 and 1.0) were studied. Results from the computational fluid dynamics study show how crossflow affects the interaction between the film-cooling jet and hot gas flow with and without downstream vortex generators. The experimental measurements were based on infrared thermography in a conjugate heat transfer environment. Results were obtained for film-cooling performance in terms of overall effectiveness, film effectiveness, and local heat transfer coefficients. The downstream vortex generators can increase the laterally averaged effectiveness by a factor of 1.5 relative to cylindrical holes, but this higher performance is restricted to low crossflow velocities and higher blowing ratios.Keywords
Funding Information
- Office of Fossil Energy (DE-AC02-07CH11358)
This publication has 50 references indexed in Scilit:
- A Review of Surface Roughness Effects in Gas TurbinesJournal of Turbomachinery, 2010
- Film-cooling holes with expanded exits: near-hole heat transfer coefficientsInternational Journal of Heat and Fluid Flow, 2000
- Film Effectiveness Over a Flat Surface With Air and CO2 Injection Through Compound Angle Holes Using a Transient Liquid Crystal Image MethodJournal of Turbomachinery, 1997
- The effect of vortex generators on a jet in a cross-flowPhysics of Fluids, 1997
- Vortical structure in the wake of a transverse jetJournal of Fluid Mechanics, 1994
- Discrete-Jet Film Cooling: A Comparison of Computational Results With ExperimentsJournal of Turbomachinery, 1994
- Film-Cooling From Holes With Compound Angle Orientations: Part 2—Results Downstream of a Single Row of Holes With 6d Spanwise SpacingJournal of Heat Transfer, 1994
- Film-Cooling From Holes With Compound Angle Orientations: Part 1—Results Downstream of Two Staggered Rows of Holes With 3d Spanwise SpacingJournal of Heat Transfer, 1994
- Film-Cooling Effectiveness Downstream of a Single Row of Holes With Variable Density RatioJournal of Turbomachinery, 1991
- Effects of hole geometry and density on three-dimensional film coolingInternational Journal of Heat and Mass Transfer, 1974