Energetic and exergetic performance of PCM incorporated ETC integrated solar still under forced mode
Authors:
Open Access
- 30 April 2025
- journal article
- Published by Fringe Global Scientific Press in Journal of Electronics and Power Engineering
- Vol. 2 (1) , 1-10
Abstract
The incorporation of phase change material (PCM) enhances the productivity of the solar still as well as makes it continuously operative during low sunshine/night time. This study analyzes the performance of single slope solar still incorporated with paraffin wax as a PCM beneath the basin liner and further integrated with an evacuated tube collector under forced convection. The results have revealed that under similar climatic conditions, PCM-incorporated solar still improves the productivity by 30% compared to the system without PCM, yielding 5.064 kg/day using 15 kg PCM at 0.03 m water depth and flow rate of 0.06 kg/s. The overall energetic and exergetic efficiencies have been found to be 39.56% and 4.05%. Irreversibility has been seen as a function of the intensity of available radiations during the daytime and is crucial at basin liner and, minimum at PCM. Moreover, at night, basin water has the highest irreversibility of ~78% (~30.0 W/m2), while PCM is at a minimum of ~2.0 W/m2. The effect of wind velocity has revealed an increase in energy efficiency by ~3%, reaching a maximum of 44.03% at an optimal speed of 3.0 m/s, while exergy efficiency decreased by ~11%. The increase in PCM and basin water mass has reduced the performance, reaching a maximum of 15 kg paraffin wax for a given water depth.Keywords
This publication has 13 references indexed in Scilit:
- Effect of various energy storage phase change materials (PCMs) and nano-enhanced PCMs on the performance of solar stills: A reviewJournal of Energy Storage, 2024
- Theoretical modeling of a glass-cooled solar still incorporating PCM and coupled to flat plate solar collectorJournal of Energy Storage, 2020
- Theoretical study on the performance of a solar still system integrated with PCM-PV module for sustainable water and power generationDesalination, 2018
- Solar distillation with single basin solar still using sensible heat storage materialsDesalination, 2017
- Use of thermal energy storage materials for enhancement in distillate output of solar still: A reviewRenewable and Sustainable Energy Reviews, 2016
- Improving the performance of solar still by using PCM as a thermal storage medium under Egyptian conditionsDesalination, 2016
- Exergy analysis of solar desalination still combined with heat storage system using phase change material (PCM)Desalination, 2016
- Performance of a solar still integrated with evacuated tube collector in natural modeDesalination, 2013
- Analytical expression for instantaneous exergy efficiency of a shallow basin passive solar stillInternational Journal of Thermal Sciences, 2011
- Exergy analysis of a passive solar stillRenewable Energy, 2008