Effective Energy Harvesting in Polymer Solar Cells Using NiS/Co as Nanocomposite Doping
Open Access
Abstract
Over the past two decades, organic semiconductors have attracted significant research interest due to their advantageous features, including low-cost fabrication, lightweight properties, and portability, for photonic device applications. In this study, nickel sulfide doped with cobalt nanocomposites were successfully synthesized via a wet-chemical processing technique and used as a dopant in the active layer of thin-film organic solar cells (TFOSCs). The poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) blend was used as the active layer in this investigation. The devices were fabricated with nanocomposites at 1 wt%, 2 wt%, and 3 wt% in the active layer to determine the optimal dopant concentration. However, the experimental evidence clearly showed that the solar cell’s performance depends on the concentration of the nanocomposites. As a result, the highest power conversion efficiency (PCE) recorded in this experimental work was 6.11% at a 1% doping concentration, compared with 2.48% for the pristine reference device under AM 1.5G illumination (100 mW/cm2) in ambient conditions. The optical and electrical properties of the active layers are found to be strongly influenced by the inclusion of nanocomposites in the medium. However, the device doped with 1 wt% nanocomposite exhibits the highest absorption intensity, consistent with the better performance observed in this study, which can be attributed to the localized surface plasmon resonance (LSPR) effect. The optical and morphological characteristics of the synthesized nanocomposites were comprehensively analyzed using high-resolution transmission electron microscopy (HRTEM), high-resolution scanning electron microscopy (HRSEM), and additional complementary techniques.
Keywords
Funding Information
- National Research Foundation (NRF), South Africa (138079)
This publication has 44 references indexed in Scilit:
- Transport Resistance Dominates the Fill Factor Losses in Record Organic Solar CellsAdvanced Energy Materials, 2025
- Structural and electrical characterization of nickel sulfide nanoparticlesOptical and Quantum Electronics, 2024
- The impact of Ag/Co nanocomposite on organic charge transport medium for improved photocurrent in polymer solar cellJournal of Polymer Science, 2023
- Plasmonic noble metal (Ag and Au) nanoparticles: From basics to colorimetric sensing applications2023
- Advances in Flexible Optoelectronics Based on Chemical Vapor Deposition‐Grown GrapheneAdvanced Functional Materials, 2022
- ZnO:Ag nano-particles decorated hole transport layer for improved photon harvestingApplied Physics A, 2022
- Single‐Junction Organic Photovoltaic Cells with Approaching 18% EfficiencyAdvanced Materials, 2020
- Organic Photovoltaics over Three DecadesAdvanced Materials, 2018
- Nickel sulfide thin films and nanocrystals synthesized from nickel xanthate precursorsJournal of Materials Science, 2017
- Charge Carrier Transport and Photogeneration in P3HT:PCBM Photovoltaic BlendsMacromolecular Rapid Communications, 2015