Jude Nodebechukwunso Ike
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jude Nodebechukwunso Ike has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Raymond Taziwa
Department of Applied Sciences, Faculty of Natural Sciences, Walter Sisulu University, Buffalo City Campus, East London 5200, South Africa
5 shared publications - Genene Tessema Mola
University of KwaZulu-Natal, Pietermaritzburg Campus
4 shared publications - Abiodun Kazeem Ogundele
School of Agriculture & Science, University of KwaZulu-Natal, Pietermaritzburg, South Africa
1 shared publication Bizuneh Gebremichael
1 shared publicationGanesh D. Sharma
1 shared publicationGenene Tessema Mola
1 shared publication
Latest Publications
- Open Access
What the Overpotential Does Not Tell You: Diagnosing Non-Comparability Across Hydrogen and Oxygen Evolution Benchmarking Metrics
Overpotential at 10 mA cm−2 (η10) is the default benchmark for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalysts, but the number is rarely comparable across studies. This Perspective identifies six measurement and reporting stages, from synthesis reproducibility to the measurement platform itself, at which undisclosed methodological choices shift reported activity by tens to hundreds of millivolts without changing the catalyst. The benchmark’s device-context origin matches neither laboratory practice nor industrial current density, and its geometric normalization is sensitive to catalyst loading. Comparable artefacts recur in Tafel slope extraction, electrochemically active surface area, turnover frequency, and Faradaic efficiency, each traced to a specific undisclosed choice and a minimum reporting requirement. We test the framework on literature values checked against their primary sources. Of 11 NiFe oxyhydroxide reports, five give η10 on a matched basis (1 M KOH, room temperature), and these span 134 to 372 mV. For commercial Pt/C, the field’s own reference material, five matched-basis reports span 33 to 93 mV, and loading is stated directly in only two of the seven reports checked. We close with a concise reporting checklist organized by metric.
Open AccessWhat the Overpotential Does Not Tell You: Diagnosing Non-Comparability Across Hydrogen and Oxygen Evolution Benchmarking Metrics
Overpotential at 10 mA cm−2 (η10) is the default benchmark for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalysts, but the number is rarely comparable across studies. This Perspective identifies six measurement and reporting stages, from synthesis reproducibility to the measurement platform itself, at which undisclosed methodological choices shift reported activity by tens to hundreds of millivolts without changing the catalyst. The benchmark’s device-context origin matches neither laboratory practice nor industrial current density, and its geometric normalization is sensitive to catalyst loading. Comparable artefacts recur in Tafel slope extraction, electrochemically active surface area, turnover frequency, and Faradaic efficiency, each traced to a specific undisclosed choice and a minimum reporting requirement. We test the framework on literature values checked against their primary sources. Of 11 NiFe oxyhydroxide reports, five give η10 on a matched basis (1 M KOH, room temperature), and these span 134 to 372 mV. For commercial Pt/C, the field’s own reference material, five matched-basis reports span 33 to 93 mV, and loading is stated directly in only two of the seven reports checked. We close with a concise reporting checklist organized by metric.
- Open Access
Effective Energy Harvesting in Polymer Solar Cells Using NiS/Co as Nanocomposite Doping
Over the past two decades, organic semiconductors have attracted significant research interest due to their advantageous features, including low-cost fabrication, lightweight properties, and portability, for photonic device applications. In this study, nickel sulfide doped with cobalt nanocomposites were successfully synthesized via a wet-chemical processing technique and used as a dopant in the active layer of thin-film organic solar cells (TFOSCs). The poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) blend was used as the active layer in this investigation. The devices were fabricated with nanocomposites at 1 wt%, 2 wt%, and 3 wt% in the active layer to determine the optimal dopant concentration. However, the experimental evidence clearly showed that the solar cell’s performance depends on the concentration of the nanocomposites. As a result, the highest power conversion efficiency (PCE) recorded in this experimental work was 6.11% at a 1% doping concentration, compared with 2.48% for the pristine reference device under AM 1.5G illumination (100 mW/cm2) in ambient conditions. The optical and electrical properties of the active layers are found to be strongly influenced by the inclusion of nanocomposites in the medium. However, the device doped with 1 wt% nanocomposite exhibits the highest absorption intensity, consistent with the better performance observed in this study, which can be attributed to the localized surface plasmon resonance (LSPR) effect. The optical and morphological characteristics of the synthesized nanocomposites were comprehensively analyzed using high-resolution transmission electron microscopy (HRTEM), high-resolution scanning electron microscopy (HRSEM), and additional complementary techniques.Open AccessEffective Energy Harvesting in Polymer Solar Cells Using NiS/Co as Nanocomposite Doping
Over the past two decades, organic semiconductors have attracted significant research interest due to their advantageous features, including low-cost fabrication, lightweight properties, and portability, for photonic device applications. In this study, nickel sulfide doped with cobalt nanocomposites were successfully synthesized via a wet-chemical processing technique and used as a dopant in the active layer of thin-film organic solar cells (TFOSCs). The poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) blend was used as the active layer in this investigation. The devices were fabricated with nanocomposites at 1 wt%, 2 wt%, and 3 wt% in the active layer to determine the optimal dopant concentration. However, the experimental evidence clearly showed that the solar cell’s performance depends on the concentration of the nanocomposites. As a result, the highest power conversion efficiency (PCE) recorded in this experimental work was 6.11% at a 1% doping concentration, compared with 2.48% for the pristine reference device under AM 1.5G illumination (100 mW/cm2) in ambient conditions. The optical and electrical properties of the active layers are found to be strongly influenced by the inclusion of nanocomposites in the medium. However, the device doped with 1 wt% nanocomposite exhibits the highest absorption intensity, consistent with the better performance observed in this study, which can be attributed to the localized surface plasmon resonance (LSPR) effect. The optical and morphological characteristics of the synthesized nanocomposites were comprehensively analyzed using high-resolution transmission electron microscopy (HRTEM), high-resolution scanning electron microscopy (HRSEM), and additional complementary techniques. - Open Access
Optimizing Organic Photovoltaic Efficiency Through Controlled Doping of ZnS/Co Nanoparticles
Thin-film organic solar cells (TFOSCs) are gaining momentum as next-generation photovoltaic technologies due to their lightweight nature, mechanical flexibility, and low cost-effective fabrication. In this pioneering study, we report for the first time the incorporation of cobalt-doped zinc sulfide nanoparticles (NPs) into a poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) bulk-heterojunction photoactive layer. NPs were successfully synthesized via a wet chemical method and integrated at varying concentrations (1%wt, 3%wt, and 5%wt) to systematically investigate their influence on device performance. The optimal doping concentration of 3%wt yielded a remarkable power conversion efficiency (PCE) of 4.76%, representing a 102% enhancement over the pristine reference device (2.35%) under ambient laboratory conditions. The observed positive trend is attributed to the localized surface plasmon resonance (LSPR) effect and near-field optical enhancement induced by the presence of ZnS/Co NPs in the active layer, thereby increasing light-harvesting capability and exciton dissociation. Comprehensive morphological and optical characterizations using high-resolution scanning electron microscopy (HRSEM), high-resolution transmission electron microscopy (HRTEM), and spectroscopic techniques confirmed uniform nanoparticle dispersion, nanoscale crystallinity, and effective light absorption. These findings highlight the functional role of NPs as dopants in enhancing TFOSC performance, providing valuable insights into optimizing nanoparticle concentration. This work offers a scalable and impactful strategy for advancing high-efficiency, flexible, and wearable organic photovoltaic devices.Open AccessOptimizing Organic Photovoltaic Efficiency Through Controlled Doping of ZnS/Co Nanoparticles
Thin-film organic solar cells (TFOSCs) are gaining momentum as next-generation photovoltaic technologies due to their lightweight nature, mechanical flexibility, and low cost-effective fabrication. In this pioneering study, we report for the first time the incorporation of cobalt-doped zinc sulfide nanoparticles (NPs) into a poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) bulk-heterojunction photoactive layer. NPs were successfully synthesized via a wet chemical method and integrated at varying concentrations (1%wt, 3%wt, and 5%wt) to systematically investigate their influence on device performance. The optimal doping concentration of 3%wt yielded a remarkable power conversion efficiency (PCE) of 4.76%, representing a 102% enhancement over the pristine reference device (2.35%) under ambient laboratory conditions. The observed positive trend is attributed to the localized surface plasmon resonance (LSPR) effect and near-field optical enhancement induced by the presence of ZnS/Co NPs in the active layer, thereby increasing light-harvesting capability and exciton dissociation. Comprehensive morphological and optical characterizations using high-resolution scanning electron microscopy (HRSEM), high-resolution transmission electron microscopy (HRTEM), and spectroscopic techniques confirmed uniform nanoparticle dispersion, nanoscale crystallinity, and effective light absorption. These findings highlight the functional role of NPs as dopants in enhancing TFOSC performance, providing valuable insights into optimizing nanoparticle concentration. This work offers a scalable and impactful strategy for advancing high-efficiency, flexible, and wearable organic photovoltaic devices. - Open Access
Controlling the Concentration of Copper Sulfide Doped with Silver Metal Nanoparticles as a Mechanism to Improve Photon Harvesting in Polymer Solar Cells
The development of thin-film organic solar cells (TFOSCs) is pivotal for advancing sustainable energy technologies because of their potential for low-cost, lightweight, and flexible photovoltaic applications. In this study, silver-doped copper sulfide (CuS/Ag) metal nanoparticles (MNPs) were successfully synthesized via a wet chemical method. These CuS/Ag MNPs were incorporated at varying concentrations into a poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) blend, serving as the active layer to enhance the photovoltaic performance of the TFOSCs. The fabricated TFOSC devices were systematically evaluated based on the optical, electrical, and morphological characteristics of the active layer. By varying the concentration of CuS/Ag MNPs, the influence of nanoparticle doping on photocurrent generation was investigated. The device incorporating 1% CuS/Ag MNPs exhibited the highest power conversion efficiency (PCE) of 5.28%, significantly outperforming the pristine reference device, which achieved a PCE of 2.53%. This enhancement is attributed to the localized surface plasmon resonance (LSPR), which augments charge transport and increases optical absorption. The CuS/Ag MNPs were characterized using ultraviolet–visible (UV-Vis) absorption spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive dispersion (EDX) analysis. These findings underscore the potential of CuS/Ag MNPs in revolutionizing TFOSCs, paving the way for more efficient and sustainable solar energy solutions.
Open AccessControlling the Concentration of Copper Sulfide Doped with Silver Metal Nanoparticles as a Mechanism to Improve Photon Harvesting in Polymer Solar Cells
The development of thin-film organic solar cells (TFOSCs) is pivotal for advancing sustainable energy technologies because of their potential for low-cost, lightweight, and flexible photovoltaic applications. In this study, silver-doped copper sulfide (CuS/Ag) metal nanoparticles (MNPs) were successfully synthesized via a wet chemical method. These CuS/Ag MNPs were incorporated at varying concentrations into a poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) blend, serving as the active layer to enhance the photovoltaic performance of the TFOSCs. The fabricated TFOSC devices were systematically evaluated based on the optical, electrical, and morphological characteristics of the active layer. By varying the concentration of CuS/Ag MNPs, the influence of nanoparticle doping on photocurrent generation was investigated. The device incorporating 1% CuS/Ag MNPs exhibited the highest power conversion efficiency (PCE) of 5.28%, significantly outperforming the pristine reference device, which achieved a PCE of 2.53%. This enhancement is attributed to the localized surface plasmon resonance (LSPR), which augments charge transport and increases optical absorption. The CuS/Ag MNPs were characterized using ultraviolet–visible (UV-Vis) absorption spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive dispersion (EDX) analysis. These findings underscore the potential of CuS/Ag MNPs in revolutionizing TFOSCs, paving the way for more efficient and sustainable solar energy solutions.
- Open Access
- 19 June 2025
- Published by Springer Nature in Chemistry Africa
- Vol. 8 (7) , 2687-2705
Review on Indacenodithiophene (IDT) and Perylene Diimides (PDIs) Based Non-Fullerene Acceptors in Organic Solar Cells: Progress and Challenges
The non-fullerene acceptors (NFAs) are dominating thin-film organic solar cells (TFOSCs) research, in recent years, because of their record high power conversion efficiency (PCE). Currently, the PCE of NFAs-based solar cells reaches 19.36%, which is much higher than the fullerene-based counterparts. The NFAs offer several advantages over the fullerene, and consequently, attracted a growing interest in the field of TFOSCs. The vast majority of the research reports are based on electron deficient acceptor–donor-acceptor (A-D-A) type small molecules that follow a simple synthesis route. A-D-A offers low photons energy losses resulting in high open-circuit voltage $$({V}_{oc})$$ and tunable energy bandgaps for efficient collection of the charges. The effect of energy loss on the performance of non-fullerene based TFOSCs was deliberated in terms of changes in energy offset and morphology of the acceptor and donor molecules blend films. Controlling the energy loss and film morphology through material synthesis and new device structure can lead to more successful performance in TFOSCs. This review focuses on the recent research progress based on indacenodithiophene (IDT) and perylene diimides (PDIs) core donor moieties for the purpose of solar energy harvesting via solution-processed TFOSCs. The influence of the new molecule acceptors’ chemical and structural properties was deliberated based on tuning energy levels, film morphology, and charge mobility. Finally, the challenges of NFAs are also presented in summary and perspective.- 19 June 2025
- Published by Springer Nature in Chemistry Africa
- Vol. 8 (7) , 2687-2705
Open AccessReview on Indacenodithiophene (IDT) and Perylene Diimides (PDIs) Based Non-Fullerene Acceptors in Organic Solar Cells: Progress and Challenges
The non-fullerene acceptors (NFAs) are dominating thin-film organic solar cells (TFOSCs) research, in recent years, because of their record high power conversion efficiency (PCE). Currently, the PCE of NFAs-based solar cells reaches 19.36%, which is much higher than the fullerene-based counterparts. The NFAs offer several advantages over the fullerene, and consequently, attracted a growing interest in the field of TFOSCs. The vast majority of the research reports are based on electron deficient acceptor–donor-acceptor (A-D-A) type small molecules that follow a simple synthesis route. A-D-A offers low photons energy losses resulting in high open-circuit voltage $$({V}_{oc})$$ and tunable energy bandgaps for efficient collection of the charges. The effect of energy loss on the performance of non-fullerene based TFOSCs was deliberated in terms of changes in energy offset and morphology of the acceptor and donor molecules blend films. Controlling the energy loss and film morphology through material synthesis and new device structure can lead to more successful performance in TFOSCs. This review focuses on the recent research progress based on indacenodithiophene (IDT) and perylene diimides (PDIs) core donor moieties for the purpose of solar energy harvesting via solution-processed TFOSCs. The influence of the new molecule acceptors’ chemical and structural properties was deliberated based on tuning energy levels, film morphology, and charge mobility. Finally, the challenges of NFAs are also presented in summary and perspective. - 14 September 2022
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 646
Silver doped ZnS core-shell nanocomposites to promote photon harvesting in polymer cells
- 14 September 2022
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 646
Silver doped ZnS core-shell nanocomposites to promote photon harvesting in polymer cells