An ANFIS model for predicting workpiece deformation during the milling of thin-walled composite components
Authors:
- 10 September 2025
- journal article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 58 (1) , 26-45
Abstract
The milling of thin-walled structural components is a meticulous procedure, particularly for workpieces with diminished mechanical qualities. Such workpieces are subject to greater deformation due to the cutting force. These deformations have a negative effect on the machining accuracy of the machined parts. Therefore, it is important to focus on the causes and effects of workpiece deformation in order to understand the surface machining quality of the workpiece. The aim of this study is to calculate the deflection of the workpiece during milling of thin-walled components made of glass fiber reinforced polymer composite (GFRP), carbon fiber reinforced polymer composite (CFRP) and basalt fiber reinforced polymer composite (BFRP). The tests were carried out at three different feed rates (0.1-0.2-0.3 mm/rev) and three different speeds (2000-3000-4000 r/min). A high-speed camera was used to detect the deflection of the thin-walled workpiece during milling. The effect of machining parameters on the variation of cutting force and deflection was statistically evaluated by analysis of variance. In order to better understand the behaviour of the parameters in the process, a predictive model was created using the artificial intelligence method Adaptive Network Based Fuzzy Inference System (ANFIS). The model is able to predict the cutting force with an accuracy of 65.7% and the deformation with an accuracy of 98.9%.Keywords
This publication has 38 references indexed in Scilit:
- An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structuresJournal of Materials Research and Technology, 2022
- Analysis of drilling-induced geometrical damages in basalt and carbon fibre-reinforced polymer (BFRP and CFRP) compositesThe International Journal of Advanced Manufacturing Technology, 2022
- Optimization of the process parameters for micro-milling thin-walled micro-parts using advanced algorithmsThe International Journal of Advanced Manufacturing Technology, 2022
- Study of milling of low thickness thermoplastic carbon fiber composites in function of tool geometry and cutting conditionsThe International Journal of Advanced Manufacturing Technology, 2021
- Stability analysis of thin-walled parts end milling considering cutting depth regeneration effectThe International Journal of Advanced Manufacturing Technology, 2021
- Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A reviewComposites Part A: Applied Science and Manufacturing, 2019
- ANFIS modeling of surface roughness in abrasive waterjet machining of carbon fiber reinforced plasticsJournal of Mechanical Science and Technology, 2017
- Data Mining and Big Data2017
- A comprehensive error analysis method for the geometric error of multi-axis machine toolInternational Journal of Machine Tools and Manufacture, 2016
- Predicting the mechanical properties of glass fiber reinforced polymers via artificial neural network and adaptive neuro-fuzzy inference systemComputational Materials Science, 2012