Research on the Mechanical Integrity of Low-Density Cement Mortar
Open Access
- 28 January 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 8
Abstract
Poor mechanical integrity of cement sheaths during the production of oil and gas wells may cause air channeling and water channeling issues in the wells, leading to severe safety problems, and adversely affecting the safety and efficiency of the oil and gas resources production. This article focuses on a low-density cement slurry system with added floating beads. The compressive strength and flexural strength of cement stones, the mechanical integrity of cement rings, and triaxial mechanical properties were assessed. The optimal dosage of floating beads and the evolution of the cement stone’s mechanical properties and deformation ability were discussed. Bonding strengths of the first and the second interfaces were evaluated using the shrinkage test results of the cement mortar. Finally, the microscopic mechanism of the change in mechanical properties was analyzed by scanning electron microscopy. The results showed that the cement mortar exhibited the best compressive strength, mechanical integrity, and deformability after blending with 15% floating beads. At the same time, the volume shrinkage of the cement mortar mixed with 15% floating beads was the smallest, only 0.00667%, plausibly indicating good bonding with a casing and the formation to reduce the occurrence of gas channeling. Finally, the microscopic test of the cement mortar showed that the bonding between floating beads and cement was not tight, so internal cracks in the cement easily developed along the bonding part of cement and floating beads. The more floating beads were mixed, the more likely was cement mortar destroyed.Keywords
This publication has 28 references indexed in Scilit:
- A novel fluid for use in oil and gas well construction to prevent the oil and gas leak from the wellboreConstruction and Building Materials, 2019
- A new prediction model for hydrostatic pressure reduction of anti-gas channeling cement slurry based on large-scale physical modeling experimentsJournal of Petroleum Science and Engineering, 2019
- Utilization of alkali-activated slag based composite in deepwater oil well cementingConstruction and Building Materials, 2018
- A new approach to improve mechanical properties and durability of low-density oil well cement composite reinforced by cellulose fibres in microstructural scaleConstruction and Building Materials, 2018
- Anti-channeling cementing technology for long horizontal sections of shale gas wellsNatural Gas Industry B, 2018
- Experimental study of the effects of CO 2 concentration and pressure at elevated temperature on the mechanical integrity of oil and gas well cementJournal of Natural Gas Science and Engineering, 2017
- Properties of oil well cement with high dosage of metakaolinConstruction and Building Materials, 2016
- Three-dimensional analysis of cement sheath integrity around WellboresJournal of Petroleum Science and Engineering, 2014
- Microstructure and performance of fly ash micro-beads in cementitious material systemConstruction and Building Materials, 2014
- Understanding the long-term chemical and mechanical integrity of cement in a CCS environmentEnergy Procedia, 2011