Analysis of Micro-Segregation of Solute Elements on the Central Cracking of Continuously Cast Bloom
Open Access
Abstract
On the basis of the Brody–Flemings model and modified Voller–Beckermann model, an analytical model of micro-segregation is established by considering the actual solidification cooling conditions of bloom. According to the developed model, the interdendritic solute distribution at the origin of the cracking gap is obtained. It is found that both phosphorus and sulfur have quite severe segregation, but both carbon and manganese have slight segregation; these results agree well with the semiquantitative analysis results of the scanning electron microscope (SEM). At the same time, the interdendritic segregation leads to an enhanced increase in the temperature range of crack formation; correspondingly, the possibility of cracking significantly increases and, thus, element segregation is the internal cause of crack formation. On the other hand, taking into account heat transfer, phase transformation, and metallurgical pressure, the strain of the solid shell is revealed through finite element software. When the solid shell thickness is equal to the distance of 90 mm between the opening point of the crack and the inner arc side, the tensile strain of the solid front is much bigger than the critical strain, which meets the external cause of crack formation; therefore, reasons for the cracking of blooms are successfully found.Keywords
Funding Information
- National Natural Science Foundation of China (51974210)
- Natural Science Foundation of Hubei Province (2019CFB697)
This publication has 15 references indexed in Scilit:
- Numerical Modeling of the Macrosegregation Improvement in Continuous Casting Blooms by Using F-EMSJOM, 2020
- Physico-chemical and mathematical modeling of phase interaction taking place during fusion welding processesMaterialwissenschaft und Werkstofftechnik, 2005
- A new criterion for internal crack formation in continuously cast steelsMetallurgical and Materials Transactions B, 2000
- A unified model of microsegregation and coarseningMetallurgical and Materials Transactions A, 1999
- Effect of Cooling Rate on ZST, LIT and ZDT of Carbon Steels Near Melting Point.ISIJ International, 1998
- Prediction of dendrite arm spacing for low alloy steel casting processesMetallurgical and Materials Transactions B, 1996
- Effect of -Carbon and Sulfur in Continuously Cast Strand on Longitudinal Surface Cracks.ISIJ International, 1996
- Numerical analysis of solute redistribution during solidification accompanying .DELTA./.GAMMA. transformation.Transactions of the Iron and Steel Institute of Japan, 1988
- Analysis of solute distribution in dendrites of carbon steel with δ/γ transformation during solidificationMetallurgical Transactions B, 1986
- The effect of melt composition on solidification cracking of steel, with particular reference to continuous castingMetallurgical Transactions B, 1982