Friction and Wear Characteristics of 18Ni(300) Maraging Steel under High-Speed Dry Sliding Conditions
Open Access
Abstract
18Ni(300) maraging steel, which has exceptional strength and toughness, is used in the field of aviation and aerospace. In this paper, using a high-speed tribo-tester, tribological behaviors of 18Ni(300) maraging steel were investigated under high-speed dry sliding conditions. Morphology of the worn surfaces and the debris was analyzed by scanning electron microscope, and the oxides of worn surfaces caused by friction heat were detected by X-ray diffraction. The experiment results reveal that the friction coefficient of frictional pairs declines with increasing load and speed. With the speed and load increasing, oxides of the worn surfaces of 18Ni(300) maraging steel change from FeO to Fe3O4 and the wear mechanism converts from adhesive wear into severe oxidative or extrusion wear.Keywords
Funding Information
- National Natural Science Foundations of China (51475359)
This publication has 18 references indexed in Scilit:
- The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steelAdditive Manufacturing, 2018
- Mild-to-severe wear transition and transition region of oxidative wear in steelsWear, 2013
- Engineering Approach for the Evaluation of Mechanical Wear Considering the Experimental Holloman High-Speed Test TrackJournal of Engineering Mechanics, 2012
- Oxidative wear kinetics in unlubricated steel sliding contactTribology International, 2011
- Study of the austenite quantification by X-ray diffraction in the 18Ni-Co-Mo-Ti maraging 300 steelJournal of Materials Science, 2006
- Structure and Mechanical Properties of Maraging and Low-Carbon Martensitic SteelsMetal Science and Heat Treatment, 2005
- Tribology of high-speed metal-on-metal sliding at near-melt and fully-melt interfacial temperaturesWear, 2001
- Microstructural changes during welding and subsequent heat treatment of 18Ni (250-grade) maraging steelMaterials Science and Engineering: A, 2000
- Transition between mild and severe wear in aluminium alloysActa Materialia, 1997
- Reverted austenite during aging in 18Ni(350) maraging steelMaterials Letters, 1995