A novel modular CSRR-based SLA 3D printed waveguide filter for c-band radar applications: suitable for various substrate thicknesses
- 22 January 2026
- journal article
- research article
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 17 (10) , 1749-1762
Abstract
The design of filters used in waveguides, which are crucial components of high-frequency communication systems, plays a significant role in improving system performance. In this study, the usage of metamaterials is first proposed, the SLA 3D printing method is used to design and fabricate CSRR meta-resonators-based bandpass waveguide filters (WGFs) with different filter orders for C-band (4-7.5 GHz), and simulated and measured filter performances are compared. Since the proposed novel WG structure is modular, it allows the design of C-band WGFs using different thicknesses of substrate materials. Also, the number of unit elements can be increased and any number of meta-resonators can be inserted to design filters of different orders ranging from 1 to 5. The electrical length of the WGF/WG structure can be changed according to the needs of the applications. The resulting WGFs demonstrated superior RF performance, being 50% lighter than comparable models found in the literature. Over the relevant frequency range, the filter exhibited return losses between 31-43 dB, insertion losses from 0.1 to 0.35 dB, FBW ranging from 12% to 16%, and quality factors between 6.23 and 8.28, depending on the filter order. The obtained experimental results align closely with the simulation predictions, confirming the effectiveness of the design.Keywords
This publication has 35 references indexed in Scilit:
- SIW-DGS bandpass filter design for C band satellite communicationsSādhanā, 2023
- Quad band metamaterial absorber based on asymmetric circular split ring resonator for multiband microwave applicationsResults in Physics, 2020
- U-joint Double split O (UDO) shaped with split square metasurface absorber for X and ku band applicationResults in Physics, 2019
- A dual‐mode waveguide filter based on stereometamaterial CSRR resonatorMicrowave and Optical Technology Letters, 2018
- Fabrication of three‐dimensional printed rectangular waveguide T‐junction with in‐phase and equal power divisionMicrowave and Optical Technology Letters, 2018
- Compact H-plane dual-band bandstop waveguide filterJournal of Computational Electronics, 2017
- Both transversal negative permeability and backward-wave propagation in X-Band waveguide with double-side SRR metamaterialsInternational Journal of RF and Microwave Computer-Aided Engineering, 2016
- A novel E-plane substrate inserted bandpass filter with high selectivity and compact sizeInternational Journal of RF and Microwave Computer-Aided Engineering, 2013
- Complementary split‐ring resonator for compact waveguide filter designMicrowave and Optical Technology Letters, 2005
- Varactor-loaded split ring resonators for tunable notch filters at microwave frequenciesElectronics Letters, 2004