Shrinkage and Mechanical Properties of Fibre‐Reinforced Blast Furnace Slag‐Steel Slag‐Based Geopolymer
Open Access
- 1 January 2022
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2022 (1)
Abstract
Geopolymer materials have several obvious advantages such as energy conservation, emission reduction, and waste reuse, so they can become substitutes for cement materials. In this study, geopolymer mortars made from blast furnace slag and steel slag reinforced by basalt fibre and polyvinyl alcohol (PVA) fibre were prepared to explore the effect on their strength and shrinkage properties. Scanning electron microscopy (SEM) was employed to characterize the reaction mechanism of the geopolymer mortars. The results show that both PVA fibre and basalt fibre can improve the mechanical properties of geopolymer mortars during the late curing period. The geopolymer reinforced by basalt fibre manifested a better toughness. A proper content of PVA fibres and basalt fibres can effectively reduce the drying and autogenous shrinkage of geopolymer mortars. The optimal content of basalt fibres and PVA fibres to reduce the drying shrinkage was 0.4%. The SEM results show that the fibres can effectively alleviate the stress concentration and prevent crack propagation.Keywords
Funding Information
- Project of Science and Technology of Henan Transportation Department (2018J4)
This publication has 32 references indexed in Scilit:
- Mechanical properties and mechanisms of fiber reinforced fly ash–steel slag based geopolymer mortarConstruction and Building Materials, 2018
- Influence of fly ash on the pore structure and shrinkage characteristics of metakaolin-based geopolymer pastes and mortarsConstruction and Building Materials, 2017
- Influence of duration of heat curing and extra rest period after heat curing on the strength and transport characteristic of alkali activated class F fly ash geopolymer mortarConstruction and Building Materials, 2017
- On drying shrinkage in alkali-activated concrete: Improving dimensional stability by aging or heat-curingCement and Concrete Research, 2017
- Intermittent curing of fly ash geopolymer mortarConstruction and Building Materials, 2016
- Effects of adding nano-TiO2 on compressive strength, drying shrinkage, carbonation and microstructure of fluidized bed fly ash based geopolymer pasteConstruction and Building Materials, 2016
- Very high strength (120MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing durationConstruction and Building Materials, 2015
- Compressive strength development in fly ash geopolymer masonry units manufactured from water treatment sludgeConstruction and Building Materials, 2015
- Factors affecting the shrinkage of fly ash geopolymersInternational Journal of Minerals, Metallurgy and Materials, 2011
- Influence of curing schedule on the integrity of geopolymersJournal of Materials Science, 2006