ZXZikai Xu

Zikai Xu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zikai Xu has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comprehensive Evaluation of the Flame-Retardant, Rheological, and Durability Performance of Fast-Melting Warm-Mix Composite Modified Asphalt Binders

    by Ming Lv, Yongkang Fu, Jinchao Yue, Zikai Xu, Shenyuan Wang, Yangming Gao, Chao Zhang

    Improving the flame-retardant performance of asphalt is particularly important for tunnel pavements, where confined environments can intensify fire hazards and smoke accumulation. This study prepared different modified asphalt binders to investigate their flame-retardant performance and rheological properties. The limiting oxygen index and smoke density rating were first used to evaluate the flame-retardant and smoke-suppression performance. Frequency sweep tests were then conducted to analyze the rheological behavior, aging characteristics, and low-temperature cracking resistance of the binders. Finally, microscopic tests were performed to reveal the thermal decomposition behavior and modification mechanism. Results showed that the incorporation of FR02 increased the limiting oxygen index of the warm-mix modified binders by more than 47%. Among the investigated binders, 13% fast-melting warm-mix flame-retardant composite modifier (SBS-WZ) exhibited the highest limiting oxygen index of 30.95% and the lowest smoke density rating of 57.73, indicating the best experimentally measured flame-retardant and smoke-suppression performance. At a reduced frequency of approximately 10−2 rad/s, the unaged 13%SBS-WZ binder exhibited a complex modulus of approximately 2.0 × 105 Pa, nearly one order of magnitude higher than those of the conventional 4%SBS- and 4%fast-melting SBS modifier (SBS-T), while its phase angle was approximately 6–10° lower. At −24 °C, the creep stiffness and creep rate of the unaged 13%SBS-WZ binder were approximately 654 MPa and 0.246, respectively. After Pressure Aging Vessel (PAV) ageing, these values changed to approximately 720 MPa and 0.237. Moreover, the onset decomposition temperature of 13%SBS-WZ was 392.1 °C, which was 17.2 °C higher than that of 4%SBS-T. Together with its higher residual mass, this result suggests enhanced thermal stability and residue-forming potential, which may partly explain the measured improvements in flame-retardant and smoke-suppression performance. However, the increased complex modulus and reduced creep rate indicate a concurrent loss of low-temperature flexibility. The findings can provide theoretical guidance and technical support for the application of this material in tunnel asphalt pavements.

  • Open Access

    Aging Evolution and Performance Correlations of Base and Rubberized Asphalt Binders Based on 2S2P1D Viscoelastic Parameters

    by Xin Yang, Xiang Yu, Zikai Xu, Jiupeng Zhang, Xiaojie Yang, Xiaokang Zhao, Chenyi Wang

    Aging has a significant influence on the rheological behavior and service performance of asphalt binders. In this study, base asphalt binder (BAB) and rubberized asphalt binder (RAB) with different aging levels were investigated to clarify their aging evolution and performance correlations. Rheological tests were conducted to evaluate high-temperature rutting resistance, intermediate-temperature fatigue performance, and low-temperature cracking resistance. The 2S2P1D viscoelastic model was used to analyze the evolution of viscoelastic parameters, while gel permeation chromatography (GPC) was adopted to characterize molecular weight changes during aging. The results showed that aging increased the rutting resistance of both binders, but reduced fatigue performance and low-temperature cracking resistance. Among the 2S2P1D viscoelastic model parameters, G∞, δ, and β were more sensitive to aging than the other parameters and exhibited relatively clear variation trends. Selected viscoelastic parameters also showed significant correlations with rheological performance indices. GPC results indicated that both binder systems progressively evolved toward higher molecular weight during aging, with the molecular weight distribution curves shifting toward the high-molecular-weight region. For RAB, Mw was more sensitive to aging than Mn and showed some fluctuation at intermediate aging stages, reflecting a more complex molecular evolution. Overall, the results indicate that selected 2S2P1D viscoelastic parameters can serve as sensitive indicators of aging evolution and provide a useful basis for interpreting the performance correlations and rheological changes of asphalt binders from a viscoelastic perspective.

  • Open Access

    Study on the Effect of Crack Density and Micro-Cracking Block Size of In Situ Softening Semi-Rigid Base

    by Liting Yu, Chunyang Yu, Haiqi He, Zikai Xu, Donliang Hu, Rui Li, Jianzhong Pei

    Reflection cracking in semi-rigid bases is a widespread distress that undermines highway safety. Priority should be given to this issue to ensure the normal performance of large-scale semi-rigid base asphalt pavements that have reached the end of their service life. At present, scholars have deeply studied and applied the theory of pavement surface layer fracture damage. However, the study of semi-rigid bases only focuses on pavement temperature influence, crack prediction, and reflection crack retardation, and there is a lack of further research on crack-related characteristics. Building on the novel concept of in situ softening for semi-rigid bases, we employ finite element analysis to quantify how transverse crack density affects overall stiffness and derive targeted softening strategies accordingly. By establishing the base micro-cracking treatment cracking block-size influence model, this study analyzes the load-bearing characteristics of cracking blocks of different sizes and recommends optimal block dimensions. This study provides practical guidance for the treatment of semi-rigid bases with maximum efficiency by expanding the application of fracture mechanics at the microscale and providing practical guidance for the high-value rehabilitation of semi-rigid bases.


  • Open Access

    Shrinkage and Mechanical Properties of Fibre‐Reinforced Blast Furnace Slag‐Steel Slag‐Based Geopolymer

    by Shengtang Xu, Chaofan Wu, Jinchao Yue, Zikai Xu

    Geopolymer materials have several obvious advantages such as energy conservation, emission reduction, and waste reuse, so they can become substitutes for cement materials. In this study, geopolymer mortars made from blast furnace slag and steel slag reinforced by basalt fibre and polyvinyl alcohol (PVA) fibre were prepared to explore the effect on their strength and shrinkage properties. Scanning electron microscopy (SEM) was employed to characterize the reaction mechanism of the geopolymer mortars. The results show that both PVA fibre and basalt fibre can improve the mechanical properties of geopolymer mortars during the late curing period. The geopolymer reinforced by basalt fibre manifested a better toughness. A proper content of PVA fibres and basalt fibres can effectively reduce the drying and autogenous shrinkage of geopolymer mortars. The optimal content of basalt fibres and PVA fibres to reduce the drying shrinkage was 0.4%. The SEM results show that the fibres can effectively alleviate the stress concentration and prevent crack propagation.