Friction and Wear Characteristics of Fe3O4 Nano-Additive Lubricant in Micro-Rolling
Open Access
- 8 October 2023
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 11 (10) , 434
Abstract
As nanotechnology has developed, some nano-additives have been employed to improve the performance of lubricants. The mechanisms of nano-additives still need to be investigated. The wear characteristics of Fe3O4 nano-additive lubricant were investigated in this study. Different diameters of Fe3O4 nanoparticles were mixed in basic oil using an ultrasonic mixer. The new lubricant was used for analytical tests at room temperature. The results showed that nano-lubricants with 20 nm nanoparticles increase the oil film strength. The coefficient of friction was reduced when 20 nm diameter 8 wt% Fe3O4 nanoparticles were mixed with lubricants. The effect of surfactants and nanoparticles in the base oil was measured using numerical simulation methods. The adsorption capacity of the lubricants was significantly improved by Fe3O4 nanoparticles, particularly when looking at the small relative atomic mass of the metal. The 8 wt% Fe3O4 lubricant exhibited optimal tribological properties when applied in micro-rolling tests. The results showed that the surface quality of the rolled samples was significantly improved, and the rolling force was dramatically reduced. At the same time, the shapes of the samples were effectively controlled in the rolling process. Therefore, Fe3O4 nanoparticles can improve the friction and wear characteristics of lubricants.Keywords
Funding Information
- National Natural Science Foundation of China (52274338, LJKZ0303)
- Education Department Foundation of Liaoning Province (52274338, LJKZ0303)
This publication has 36 references indexed in Scilit:
- Tribological and tribochemical properties of magnetite nanoflakes as additives in oil lubricantsParticuology, 2014
- Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumptionJournal of Cleaner Production, 2014
- Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machiningJournal of Cleaner Production, 2014
- Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditionsTribology International, 2013
- Sliding tribological properties of 0.45% carbon steel lubricated with Fe3O4 magnetic nano-particle additives in baseoilWear, 2013
- Grafting of Dispersants on MoS2 Nanoparticles in Base Oil Lubrication of SteelTribology Letters, 2012
- CU nanoparticles effect on the tribological properties of hydrosilicate powders as lubricant additive for steel–steel contactsTribology International, 2011
- Tribological properties of diamond and SiO2 nanoparticles added in paraffinTribology International, 2009
- Tribological behavior of copper nanoparticles as additives in oilCurrent Applied Physics, 2009
- Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricantTransactions of Nonferrous Metals Society of China, 2008