The Importance of Wake Meandering on Wind Turbine Fatigue Loads in Wake
Open Access
Abstract
Considering loads when optimizing wind-farm layouts or designing farm-control strategies is important, but the computational cost of using high-fidelity wake models in the loop can be prohibitively high. Using simpler models that consider only the spatial variation of turbulence statistics is a tempting alternative, but the accuracy of these models with respect to the aeroelastic response is not well understood. This paper therefore highlights the effect of replacing wake meandering with spatially varying statistics (“profile functions”) in the inflow to a downstream turbine. Profile functions at different downstream and lateral locations are extracted from a large-eddy simulation with an upstream turbine and compared with two lower-fidelity models: one that prescribes both the mean and standard deviation of the turbulence and one that prescribes only the mean. The aeroelastic response of an NREL 5 MW wind turbine is simulated with the three different wake-model fidelities, and various quantities of interest are compared. The mean values for the power and rotor speed for the medium-and low-fidelity model match well, but the accuracy of the fatigue loads varies greatly depending on the load channel. Prescribing the profile function for the standard deviation is only beneficial for the tower-base fore-aft moment; all other DELs had similar accuracies for both the medium- and low-fidelity models. The paper concludes that blade DELs can be estimated using these simple models with some accuracy, but care should be taken with the load channels related to the shaft torsion and tower-base fore-aft bending moment.Keywords
This publication has 19 references indexed in Scilit:
- Wind farm power optimization through wake steeringProceedings of the National Academy of Sciences, 2019
- Initial results from a field campaign of wake steering applied at a commercial wind farm – Part 1Wind Energy Science, 2019
- PyConTurb: an open-source constrained turbulence generatorJournal of Physics: Conference Series, 2018
- Combining induction control and wake steering for wind farm energy and fatigue loads optimisationJournal of Physics: Conference Series, 2018
- Wind farm layout optimization using a Gaussian-based wake modelRenewable Energy, 2017
- Wind farm multi-objective wake redirection for optimizing power production and loadsEnergy, 2017
- Estimating the wake deflection downstream of a wind turbine in different atmospheric stabilities: an LES studyWind Energy Science, 2016
- Wake effect modeling: A review of wind farm layout optimization using Jensen׳s modelRenewable and Sustainable Energy Reviews, 2016
- Performance Test of a 3MW Wind Turbine – Effects of Shear and TurbulenceEnergy Procedia, 2015
- Wind plant power optimization through yaw control using a parametric model for wake effects-a CFD simulation studyWind Energy, 2014