Abstract
Fracture mechanics has revealed the knowledge of strength of materials including cracks under monotonic and cyclic loadings. The powerfulness of fracture mechanics is clear theory and very useful fracture mechanics parameters, however J integral has the limitation of monotonic loading and small scale yielding. In recent years, advances in computer simulation technology have made it possible to perform complex 3-dimensional finite element analysis and to calculate elastic-plastic states of a crack tip using the actual material property. We have employed the combination parameter of stress triaxiality, which is related to ductile fracture, and equivalent plastic strain, which becomes a fracture parameter under plane stress state, for fundamental parameters in order to describe fracture criterion under the large scale yielding. The parameter is not enough for cyclic loading case as crack propagation criterion. Various studies are in progress with these. In this study, stress and plastic stress distribution are evaluated in detail using elastic-plastic finite element analysis. The analysis model uses a 1/4 unidirectional tension model. We perform tension and three point bending analysis on the model and loading condition is a monotonic loading. Crack propagation direction and crack propagation condition will be well examined in comparison with the past studies for large scale yielding. The analysis results show that the stress triaxiality value is the highest at the center of the specimen thickness. By comparing the results of the past research and the result, we are able to confirm the validity of the analysis model used in this research.