Temperature effects on tensile and bending properties of carbon/Kevlar hybrid fiber sandwich composites
Authors:
- 5 December 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 46 (7) , 6179-6191
Abstract
In this paper, the mechanical properties of carbon/Kevlar hybrid fiber‐reinforced resin composites at different temperatures were studied. The hybrid composites were prepared by Vacuum Assisted Resin Infusion (VARI). The sandwich structure of reinforcement consists of Kevlar plain weave fiber as a surface layer and carbon fiber plain weave fabric as a core layer, while the matrix consists of a curing agent and epoxy resin. The bending and tensile properties of the composite specimens were tested at different temperatures using the in situ testing method, separately. The fracture morphology was analyzed using scanning electron microscopy (SEM) to understand the damage mechanism of the material properties at the micro‐scales. The results show that the sandwich composite material shows a positive hybrid effect. The carbon fibers increases effectively the strength and rigidity of the sample, while Kevlar fiber improves the toughness and brittle damage mode. The mechanical properties of hybrid composite laminates are strongly dependent on temperature. The tensile and bending properties of carbon/Kevlar hybrid composites decreased when the temperature increased from −30°C to 40°C. The effect of temperature on the bending properties was more pronounced for the carbon/Kevlar hybrid composites. This study consists of damage analysis and variation analysis of the mechanical behavior of carbon/Kevlar composite specimens, which will lay the foundation to provide basic data for the application of carbon/Kevlar hybrid composites.Highlights: Advantages of carbon/Kevlar hybrid sandwiched structure on tensile and bending properties. Comprehensive mechanical property testing in multiple composite environments. Based on the hybrid effect and temperature effect, the damage mechanism of the sample was analyzed.Keywords
This publication has 24 references indexed in Scilit:
- Study on impact properties of carbon/kevlar fiber hybrid compositesPolymer Composites, 2024
- Effectiveness of multi‐walled carbon nanotube on the improvement of tensile, flexural, and low‐velocity impact properties of hybrid Kevlar/carbon fiber reinforced epoxy‐based compositesPolymer Composites, 2024
- Evaluation and prediction of tensile properties of 3D‐printed continuous carbon/Kevlar fiber‐filled composites by coaxial hybrid processPolymer Composites, 2024
- Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber compositesPolymer Composites, 2024
- Research and prediction of creep behavior of triaxial warp‐knitted composites by time–temperature equivalent principlePolymer Composites, 2023
- Research on curing kinetics of multiaxial warp‐knitted compositesPolymer Composites, 2023
- Effect of continuous fiber orientations on quasi‐static indentation properties in 3D printed hybrid continuous carbon/Kevlar fiber reinforced compositesPolymers for Advanced Technologies, 2023
- Hybrid effects and interactive failure mechanisms of hybrid fiber composites under flexural loading: Carbon/Kevlar, carbon/glass, carbon/glass/KevlarAerospace Science and Technology, 2023
- Experimental and numerical research of temperature on tensile properties of multiaxial warp‐knitted compositesPolymer Composites, 2020
- Effects of interfacial coating and temperature on the fracture behaviours of unidirectional Kevlar and carbon fibre reinforced epoxy resin compositesJournal of Materials Science, 1991