Study on impact properties of carbon/kevlar fiber hybrid composites
Authors:
- 31 March 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (10) , 8665-8676
Abstract
In this article, carbon/kevlar hybrid composites were prepared using Vacuum Assisted Resin Infusion (VARI). The sandwich structure with plain carbon weave fabric as the core layer and plain kevlar weave fabric as the surface layer was selected as reinforcement and the solution of epoxy resin and curing agent was selected as matrix. The low velocity impact experiment and compression after impact (CAI) experiment were carried out on the samples at different hybrid ratio and different temperatures, and the mechanical response on the impact loads were analyzed respectively. The results show that the specimen can limit the delamination defect expansion of the surface kevlar fiber as the carbon fiber used as the core layer, which reduce the delamination defect area and improve the impact resistance of the sample. The toughness of the sample improves the brittle failure mode, that is, the sample still has a certain bearing capacity after the load exceeds the maximum strength, the sandwiched composites presents a positive hybrid effect. With the increase of temperature, the matrix was obviously softened, the macromolecular movement in the system was intensified, the three‐dimensional network macromolecular structure of the matrix and the fiber/matrix interface properties were damaged, and the mechanical properties showed an obvious downward trend. As far as the influences of hybrid ratio and temperature on impact behavior of composite are concerned, it lay a theoretical foundation for the industrial application of carbon/kevlar hybrid composites.Highlights: The sandwiched structure was used to design the composites, which greatly improves the impact properties of the specimens. The impact properties and compression after impact properties at different hybrid ratios and different temperatures were studied. Based on the hybrid effect and temperature effect, the impact failure mechanism of the sample was analyzed.Keywords
Funding Information
- Natural Science Foundation of Inner Mongolia Autonomous Region (2021MS01010)
- National Natural Science Foundation of China (12362012, 12272189)
This publication has 23 references indexed in Scilit:
- Tensile, impact, and the damping performance of woven flax‐carbon hybrid polyamide biocompositesPolymer Composites, 2023
- Experimental investigations on the repeated low velocity impact and compression‐after‐impact behaviors of woven glass fiber reinforced composite laminatesPolymer Composites, 2023
- Research and prediction of creep behavior of triaxial warp‐knitted composites by time–temperature equivalent principlePolymer Composites, 2023
- Low‐velocity impact properties of carbon fiber/ultrahigh molecular weight polyethylene fiber hybrid compositesPolymer Composites, 2023
- Effect of nanosilica on low‐velocity impact and compression after impact properties of continuous carbon fiber‐reinforced epoxy composites manufactured by 3D printingPolymer Composites, 2023
- Mechanical and fracture properties of carbon nano fibers/short carbon fiber epoxy compositesPolymer Composites, 2023
- Study on impact behavior of glass fiber/PVC curved sandwich structure compositesPolymer Composites, 2022
- Numerical and experimental investigations on the low‐velocity impact properties of hybrid Kevlar fiber/basalt fiber reinforced epoxy composites: Effects of impactor nose shape and fiber stacking sequencesPolymer Composites, 2021
- Polymer nanocomposites for high-velocity impact applications-A reviewComposites Communications, 2020
- Low velocity impact and compression after impact simulation of thin ply laminatesComposites Part A: Applied Science and Manufacturing, 2018