Aerosol filtration performance of nanofibrous mats produced via electrically assisted industrial‐scale solution blowing
Authors:
- 18 August 2021
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 61 (10) , 2557-2566
Abstract
Highly efficient polyamide 6 (PA6)‐based nanofibrous air filter media was developed for particulate matter (PM) removal in the ambient atmosphere. The PA6 nanofibrous mats exhibited 85% PM0.3 capture performance at a cost of 164 Pa pressure drop when the multiple‐nozzle solution blowing system was set to 8 m/h fabric winding speed. However, an increase in the winding speed at a constant feeding rate lowered the filtration efficiency to 62% due to the less amount of nanofibrous mats collected on the substrate. The application of electrical field at the same parameters allowed us to produce a filter media having FFP3‐level filtration performance, which means 99% PM0.3 capture performance. This was attributed to a fine fiber diameter (116 nm), higher solidity value (0.149), and lower average pore size (2.28 μm). These results show that the electrically assisted solution blowing provides a feasible route for the production of high‐quality nanofibrous filter media.Keywords
Funding Information
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (118M035)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (118M035)
This publication has 49 references indexed in Scilit:
- Effect of air blowing on the morphology and nanofiber properties of blowing‐assisted electrospun polycarbonatesJournal of Applied Polymer Science, 2011
- Solution spraying of poly(methyl methacrylate) blends to fabricate microtextured, superoleophobic surfacesPolymer, 2011
- Electrospun and solution blown three-dimensional carbon fiber nonwovens for application as electrodes in microbial fuel cellsEnergy & Environmental Science, 2011
- Effect of face velocity, nanofiber packing density and thickness on filtration performance of filters with nanofibers coated on a substrateSeparation and Purification Technology, 2010
- Generation of polymer ultrafine fibers through solution (air‐) blowingJournal of Applied Polymer Science, 2009
- Preparation of poly(ester imide) ultrafine fibers by gas‐jet/electrospinningJournal of Applied Polymer Science, 2009
- Solution blow spinning: A new method to produce micro‐ and nanofibers from polymer solutionsJournal of Applied Polymer Science, 2009
- EFFECT OF GAS FLOW RATE ON CRYSTAL STRUCTURES OF ELECTROSPUN AND GAS-JET/ELECTROSPUN POLY(VINYLIDENE FLUORIDE) FIBERSChinese Journal of Polymer Science, 2009
- Electrospinning of polyamides with different chain compositions for filtration applicationPolymer Engineering & Science, 2008
- Preparation of poly(ether sulfone) nanofibers by gas‐jet/electrospinningJournal of Applied Polymer Science, 2007