Non-uniform crystallinity and temperature distribution during adjacent laser-assisted tape winding process of carbon/PA12 pipes
Open Access
- 7 November 2020
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 111 (11-12) , 3063-3082
Abstract
The non-uniform temperature and crystallinity distributions present in carbon fiber–reinforced PA12 composite pipes, produced via laser-assisted tape winding (LATW), are investigated in this paper. The width of the laser source is usually larger than the substrate width which causes multiple heating and cooling of some regions of the (neighboring) substrate and hence temperature and crystallinity gradients during the adjacent hoop winding. A kinematic-optical-thermal (KOT) model coupled with a non-isothermal crystallinity model is developed to capture the transient temperature and crystallinity distributions for growing substrate thickness and width. The predicted temperature trends are validated with thermocouple and thermal camera measurements. The substrate temperature varies in the width direction up to 52%. This will lead to extra polymer remelting and possible degradation. The maximum variation of the crystallinity degree across the width is found to be 270% which shows agreement with the trend of the measured crystallinity degree. It is found that a more realistic description of the melting behavior of the matrix is needed to obtain a more accurate prediction of the crystallinity distribution.Keywords
Funding Information
- Horizon 2020 (Grant Agreement 678875)
This publication has 58 references indexed in Scilit:
- A new global kinematic-optical-thermal process model for laser-assisted tape winding with an application to helical-wound pressure vesselMaterials & Design, 2020
- Review of automated fibre placement and its prospects for advanced compositesJournal of Materials Science, 2020
- Tailored irradiation by VCSEL for controlled thermal states in thermoplastic tape placement2018
- About the origins of residual stresses in in situ consolidated thermoplastic composite ringsInternational Journal of Material Forming, 2016
- On the mechanical performance of glass-fibre-reinforced thermosetting-resin pipes: A reviewComposite Structures, 2016
- The effects of heat input on adjacent paths during Automated Fibre PlacementComposites Part A: Applied Science and Manufacturing, 2015
- Thermoplastic composite solution for deep oil and gas reservesReinforced Plastics, 2013
- Thermoplastic pipes – lighter, more flexible solutions for oil and gas extractionReinforced Plastics, 2013
- Thermal Phenomena in Fiber-reinforced Thermoplastic Tape Winding Process: Computational Simulations and Experimental ValidationsJournal of Composite Materials, 2004
- Thermal Analysis of Continuous Filament-Wound CompositesJournal of Thermoplastic Composite Materials, 1996