MDMartin van Drongelen

Martin van Drongelen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Martin van Drongelen has a total of 100 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Isothermal and non-isothermal crystallization kinetics modelling of neat and composite PA410

    by Sabrine Bentalib, Martin van Drongelen, Edwin T.J. Klompen, Nick G.J. Helthuis, Remko Akkerman


  • Open Access

    Fully Bio‐Based Epoxy Resins from Liquefied Wood for Chemically Recyclable Wood Coatings

    by Qisong Hu, Ricardo P. Martinho, Suna Azhdari, Jean‐Paul Lange, Martin van Drongelen, M. Pilar Ruiz, Frederik R. Wurm

    Epoxy resins are widely used in the coatings industry, yet their petroleum‐based origin and crosslinked structures pose challenges for sustainability and recyclability. This study explores a cradle‐to‐cradle approach for bio‐based epoxy wood coatings using the heavy fraction of liquefied wood (LW) as a renewable curing agent. LW, a lignin‐like compound rich in aromatic structures, acts as a hydroxyl donor and reacts with biobased glycerol diglycidyl ether (GDE). This article presents the molecular characterization of LW by different techniques. It demonstrates that the resulting coating has a performance comparable to commercial bisphenol A epoxy‐amine systems, and shows that the crosslinked product of LW and GDE can be depolymerized and recycled as aromatic polyol using the same liquefaction process. Importantly, this work highlights that the recycling process does not require removing the coating from the wood matrix. Instead, the coated wood, including both the wood and coating, can be recycled together through the same liquefaction process used to produce the LW. This LW‐epoxy platform demonstrates the feasibility of creating wood coatings with improved recyclability, contributing to more sustainable practices in the coatings industry.


  • Open Access

    Crystallization of poly(lactic acid) nucleated with the sorbitol TBPMN

    by F.F.G. Sebek, O.J. Nguon, A. Bartos, M. Ten Brinke, M. van Drongelen, H. Gojzewski, J. Lefas, G.J. Vancso


  • Open Access

    Fatigue-Crack Propagation of High-Density Polyethylene Homopolymers: Influence of Molecular Weight Distribution and Temperature

    by Robin R.J. Cerpentier, Tim van Vliet, Leonid V. Pastukhov, Martin van Drongelen, Mark J. Boerakker, Theo A. Tervoort, Leon E. Govaert


  • Open Access

    Characterisation and improvement of the quality of mixing of recycled thermoplastic composites

    by Guillaume A. Vincent, Thomas A. de Bruijn, Sebastiaan Wijskamp, Mohammed Iqbal Abdul Rasheed, Martin van Drongelen, Remko Akkerman


  • Open Access

    Process- and material-induced heterogeneities in recycled thermoplastic composites

    by Guillaume A Vincent, Thomas A de Bruijn, Sebastiaan Wijskamp, Martin van Drongelen, Remko Akkerman

    A novel recycling solution for thermoplastic composites (TPCs) was recently implemented. The processing steps comprise shredding of TPC offcuts to flakes of a few centimetres, melting and blending of the flakes in a low-shear mixer, extrusion of a molten mixed dough and subsequent compression moulding in a press. This material and process are similar to the compression moulding of long-fibre thermoplastics (LFTs) that have been in the market for decades, such as glass mat thermoplastics (GMT) or direct-LFT. However, the input material in this recycling route consists of multi-layered woven flakes, which is very different from the pellets or chopped rovings of other LFTs. Process- and material-induced heterogeneities such as fibre orientation, percolation, variation of fibre fraction, or fibre attrition may be different for this new material. The development of this recycling technology and future industrial applications require more confidence in the material and process. The objective of this study is to characterise these heterogeneities for this recycling solution, and compare them to those generated in regular LFTs. It was found that the process- and material-induced heterogeneities of the recycled TPCs are similar to other LFTs, for the aspects listed here: fibre orientation, percolation, variation of fibre fraction and fibre attrition. In comparison to GMT, the effect of the mixing step is particularly noticeable on the local variation of fibre fraction within the panels. Industrial applications of this recycling route will benefit from this similarity, as it improves the confidence in the material and process combination.


  • Open Access

    Non-uniform crystallinity and temperature distribution during adjacent laser-assisted tape winding process of carbon/PA12 pipes

    by S. M. Amin Hosseini, Martin Schäkel, Ismet Baran, Henning Janssen, Martin van Drongelen, Remko Akkerman

    The non-uniform temperature and crystallinity distributions present in carbon fiber–reinforced PA12 composite pipes, produced via laser-assisted tape winding (LATW), are investigated in this paper. The width of the laser source is usually larger than the substrate width which causes multiple heating and cooling of some regions of the (neighboring) substrate and hence temperature and crystallinity gradients during the adjacent hoop winding. A kinematic-optical-thermal (KOT) model coupled with a non-isothermal crystallinity model is developed to capture the transient temperature and crystallinity distributions for growing substrate thickness and width. The predicted temperature trends are validated with thermocouple and thermal camera measurements. The substrate temperature varies in the width direction up to 52%. This will lead to extra polymer remelting and possible degradation. The maximum variation of the crystallinity degree across the width is found to be 270% which shows agreement with the trend of the measured crystallinity degree. It is found that a more realistic description of the melting behavior of the matrix is needed to obtain a more accurate prediction of the crystallinity distribution.


  • Open Access

    Identification of plasticity-controlled creep and fatigue failure mechanisms in transversely loaded unidirectional thermoplastic composites

    by Ozan Erartsın, Martin van Drongelen, Leon E. Govaert

    In continuous fiber-reinforced thermoplastics, the macroscopic failure mode in transverse long-term failure is dominated by a brittle crack-growth mechanism. Neat thermoplastic matrices, on the other hand, generally display also a plasticity-controlled mechanism in long-term loading at elevated stress levels and/or temperature. This failure mechanism requires a different approach to lifetime prediction than crack growth; hence, it is important to identify it in the long-term performance of composites. In this study, we demonstrate the presence of the plasticity-controlled failure mechanism in long-term failure of transversely loaded unidirectional (UD) thermoplastic composites made of glass/iPP, carbon/PEEK and carbon/PEKK. The main method used is to compare the lifetime in cyclic loading to that in static loading at the same level of maximum stress, where an increase in lifetime is characteristic for plasticity controlled failure, and, vice versa, a decrease is indicative for fatigue crack growth. In addition, the applicability of a lifetime prediction method common to plasticity-controlled failure of neat thermoplastics is evaluated for the composites investigated. The results of this study indicate that the plasticity-controlled failure was present in composites, although the extent to which the effects are present varied depending on the materials investigated. Glass/iPP showed the most explicit evidence of the plasticity-controlled failure over the entire load range experimentally covered. Its long-term failure was delayed with a decrease in the stress ratio and lifetime was predicted well using the principles of plasticity-controlled failure.


  • Open Access

    Influence of the Polymer Interphase Structure on the Interaction between Metal and Semicrystalline Thermoplastics

    by Liangyong Chu, Wouter J. B. Grouve, Martin van Drongelen, Yash Guha, Erik G. de Vries, Remko Akkerman, Matthijn B. de Rooij

    It is demonstrated that a lamellar crystalline structure may form near the metal–polymer interface during the comolding of metal–thermoplastic joints. The influence of the crystalline morphology near the interface on the rupture behavior of the joint is studied experimentally. High‐resolution scanning electron microscopy (HR–SEM), atomic force microscopy (AFM), and optical microscopy are used to characterize the microstructure of the metal–thermoplastic interface. The results show that a lamellar crystalline structure at the interface promotes cohesive failure, i.e., the crack runs in the polymer. Additional experiments show that a transcrystalline polymer structure at the interface results in failure at the interface. Herein, two methodologies have been developed to characterize the formation of the transcrystalline polymer interphase structure based on X‐ray diffraction and polarized light hot stage microscopy. The results show the importance of the polymer interphase structure for metal–thermoplastic interactions. Understanding of the formation of the polymer interphase and its influence on the interfacial bonding strength are vital for thermoplastic applications such as fiber‐reinforced thermoplastic composites, tool surface design for processing of thermoplastics, and their composites as well as for metal–polymer hybrid joints.


  • Open Access

    Optimization of the laser-assisted tape winding process using an inverse kinematic-optical-thermal model

    by S. M. Amin Hosseini, Frank Esselink, Ismet Baran, Martin van Drongelen, Remko Akkerman

    A new inverse kinematic-optical-thermal (IKOT) model is introduced to control the process temperature in laser assisted tape winding and placement processes. The optimum time-dependent laser power distribution is obtained by employing a grid of independent laser cells while keeping the temperature of substrate and tape at the target temperature. Multi-layer cylindrical hoop winding with laser grids of 1 × 1, 28 × 1, and 28 × 11 and helical winding of a pressure vessel with laser grids of 22 × 1 and 22 × 11 are considered. It is found that the optimized laser power distribution pattern remains the same during the consecutive hoop winding process while the total power reduces to compensate the heat accumulation. A more non-uniform laser power distribution is obtained for the helical winding because the substrate curvature changes drastically at the dome section of the pressure vessel. The change in the optimum total laser power is found to be almost constant for the helical winding case. Finally, the IKOT model is evaluated by analyzing the effect of the computational parameters on the optimized process temperature. Graphical abstract