Gradient Distribution of Microstructures and Mechanical Properties in a FeCoCrNiMo High-Entropy Alloy during Spark Plasma Sintering
Open Access
Abstract
A novel graded material of a high-entropy alloy (HEA) FeCoCrNiMo was fabricated by spark plasma sintering (SPS) processing. After SPS, the HEA specimens consisted of a single face-centred cubic (FCC) phase in the center, but dual FCC and a tetragonal structure σ phase near the surface. Surprisingly, the sintering pressure was sufficient to influence the proportion of phases, and thus the properties of HEA samples. The hardness of the specimens sintered under the pressures of 30, 35, and 40 MPa increased gradually from 210 HV0.2, which is the single FCC phase in the center, to the maximum value near the surface as a result of the gradual increase in the fraction of the transformed σ phase. The σ phase, being a complex hard and brittle intermetallic particle to manipulate the properties of FCC-type HEA systems, which could be influenced by pressure, indicated a major possibility for designing gradient HEA materials.Keywords
Funding Information
- State Key Laboratory of Powder Metallurgy (CSU 621011808)
- XUCHANG Fellowship Program (XW2017-40)
- the the project of Innovation and Entrepreneur Team Introduced by Guangdong Province (201301G0105337290)
- Special Funds for Future Industrial Development of Shenzhen (No. HKHTZD20140702020004)
This publication has 24 references indexed in Scilit:
- Revealing the Selection of σ and μ Phases in CoCrFeNiMox High Entropy Alloys by CALPHADJournal of Phase Equilibria and Diffusion, 2018
- Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phasesActa Materialia, 2016
- Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloyActa Materialia, 2016
- A precipitation-hardened high-entropy alloy with outstanding tensile propertiesActa Materialia, 2016
- Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy AlloyJOM, 2013
- Significant hardening due to the formation of a sigma phase matrix in a high entropy alloyIntermetallics, 2013
- Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloysActa Materialia, 2011
- Decomposition in multi-component AlCoCrCuFeNi high-entropy alloyActa Materialia, 2011
- Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloyJournal of Alloys and Compounds, 2009
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004