Enhanced stress relaxation of Sn–3.8Ag–0.7Cu solder by electrical current
- 1 June 2010
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 25 (6) , 1172-1178
Abstract
The stress relaxation responses of the Sn–3.8Ag–0.7Cu joints following exposure to electrical currents were examined to investigate the effect of electromigration on the reliability of solder joints. It was found that the stress relaxation rate was enhanced for the Sn–3.8Ag–0.7Cu solder joints subjected to a current density of 2 × 104 A/cm2. Sn hillock formation was observed in situ on the surface of the solder joint and the increase of the hillock volume was obtained as a function of the current application time. Analysis of the vacancy flux indicated that the variations of the vacancy concentration with the electromigration time from the calculations agreed with the growth kinetics of the hillocks observed in the experiments. By modeling the stress relaxation as a climb-assisted dislocation glide process, it is shown that the vacancy accumulation induced by electromigration enhanced the dislocation climb rate, resulting in a large increase of the stress relaxation rate.Keywords
This publication has 23 references indexed in Scilit:
- Electromigration of Sn–8 wt.% Zn–3 wt.% Bi and Sn–9 wt.% Zn–1 wt.% Cu soldersJournal of Alloys and Compounds, 2009
- Electromigration of Pb-free solder under a low level of current densityJournal of Alloys and Compounds, 2008
- Investigation of diffusion and electromigration parameters for Cu–Sn intermetallic compounds in Pb-free solders using simulated annealingActa Materialia, 2007
- Electromigration effect on solder bump in Cu/Sn–3Ag–0.5Cu/Cu systemScripta Materialia, 2006
- Effect of electromigration on mechanical shear behavior of flip chip solder jointsJournal of Materials Research, 2006
- Creep deformation characteristics of tin and tin-based electronic solder alloysMetallurgical and Materials Transactions A, 2005
- Mechanism of electromigration-induced failure in the 97Pb–3Sn and 37Pb–63Sn composite solder jointsJournal of Applied Physics, 2003
- Indentation creep of β-Sn and Sn–Pb eutectic alloyMaterials Science and Engineering: A, 2001
- Stress relaxation behavior of composite and eutectic Sn-Ag solder jointsJournal of Electronic Materials, 2001
- Vacancy supersaturation model for electromigration failure under dc and pulsed dc stressJournal of Applied Physics, 1992