Assembly of Surface-Mounted Devices on Flexible Substrates by Isotropic Conductive Adhesive and Solder and Lifetime Characterization
Open Access
- 1 August 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (8) , 1240
Abstract
The assembly of passive components on flexible electronics is essential for the functionalization of circuits. For this purpose, adhesive bonding technology by isotropic conductive adhesive (ICA) is increasingly used in addition to soldering processes. Nevertheless, a comparative study, especially for bending characterization, is not available. In this paper, soldering and conductive adhesive bonding of 0603 and 0402 components on flexible polyimide substrates is compared using the design of experiments methods (DoE), considering failure for shear strength and bending behavior. Various solder pastes and conductive adhesives are used. Process variation also includes curing and soldering profiles, respectively, amount of adhesive, and final surface metallization. Samples created with conductive adhesive H20E, a large amount of adhesive, and a faster curing profile could achieve the highest shear strength. In the bending characterization using adhesive bonding, samples on immersion silver surface finish withstood more cycles to failure than samples on bare copper surface. In comparison, the samples soldered to bare copper surface finish withstood more cycles to failure than the soldered samples on immersion silver surface finish.Keywords
This publication has 26 references indexed in Scilit:
- Flexible electronics under strain: a review of mechanical characterization and durability enhancement strategiesJournal of Materials Science, 2015
- Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A ReviewIEEE Sensors Journal, 2014
- Photonic Flash Soldering of Thin Chips and SMD Components on Foils for Flexible ElectronicsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2014
- Influence of curing conditions on mechanical properties and reliability of the interconnects made by ICA for printed electronics with micro additives2014
- Mechanics of stretchable electronics with high fill factorsInternational Journal of Solids and Structures, 2012
- Flexible embedded circuitry: A novel process for high density, cost effective electronicsMicroelectronic Engineering, 2010
- Materials and Mechanics for Stretchable ElectronicsScience, 2010
- An Assessment of Immersion Silver Surface Finish for Lead-Free ElectronicsJournal of Electronic Materials, 2009
- Qualification and Reliability Tests of Flexible Printed Circuits2007
- Study of immersion silver and tin printed-circuit-board surface finishes in lead-free solder applicationsJournal of Electronic Materials, 2004