Comparation between Pulsed Nd:YAG Laser Superficial Treatment and Ceramic Coating in Creep Test of Ti-6-4V Alloy
- 1 October 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 660-661, 229-234
Abstract
The objective of this work was evaluating the creep resistance of the Ti-6Al-4V alloy with superficial treatment of pulsed Nd:YAG laser and ceramic coating in creep test of Ti-6Al-4V alloy. It was used Ti-6Al-4V alloy as cylindrical bars under forged and annealing of 190oC by 6 hours condition and cooled by air. The Ti-6Al-4V alloy after the superficial treatment of pulsed Nd:YAG laser and ceramic coating was submitted to creep tests at 600°C and 125 at 319 MPa, under constant load mode. In the Nd:YAG pulsed laser treatment was used an environment of 40 % N and 60 % Ar, with 2.1 W of power and 10 m/s of speed. Yttria (8 wt.%) stabilized zirconia (YSZ) with a CoNiCrAlY bond coat was atmospherically plasma sprayed on Ti-6Al-4V substrates by Sulzer Metco Type 9 MB. The obtained results suggest the laser treatment on Ti-6Al-4V alloy improved its creep resistance.Keywords
This publication has 14 references indexed in Scilit:
- Effect of coating on the creep behavior of the Ti–6Al–4V alloyMaterials Science and Engineering: A, 2008
- Laser nitriding of titanium alloy in the atmosphere environmentSurface and Coatings Technology, 2007
- Creep behavior of Ti–6Al–4V and a comparison with titanium matrix compositesMaterials Science and Engineering: A, 2006
- Effect of environment on the creep behavior of the Ti–6Al–4V alloyMaterials Science and Engineering: A, 2005
- Creep mechanisms and physical modeling for Ti–6Al–4VMaterials Science and Engineering: A, 2004
- Depth profiling characterisation of the surface layer obtained by pulsed Nd:YAG laser irradiation of titanium in nitrogenSurface and Coatings Technology, 2003
- Single pulse Nd:YAG laser irradiation of titanium: influence of laser intensity on surface morphologySurface and Coatings Technology, 2002
- High performance coatings for titanium alloys to protect against oxidationSurface and Coatings Technology, 2001
- Creep deformation of evgineering alloys: Developments from physical modelling.ISIJ International, 1990
- The effect of high temperature exposure on the creep resistance of Ti6Al4V alloyMaterials Science and Engineering, 1976