Preparation and Characterization of Cellulose Nanofibril-Waterborne Polyurethane Composite Films
Open Access
- 1 January 2023
- journal article
- research article
- Published by Tsinghua University Press in Paper and Biomaterials
- Vol. 8 (1) , 26-34
Abstract
To improve the performance of polyurethane films, small amounts of cellulose nanofibrils (CNF) were physically blended with a waterborne polyurethane (WPU) emulsion, and then CNF/WPU composite films were prepared by cast-coating and drying. The particle size of the emulsions and the chemical structure, micromorphology, thermal stability, mechanical properties, and water resistance of the composite films were characterized using a Malvern laser particle size analyzer, Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), an electronic strength machine, water contact angle analysis (WCA), and water absorption tests, respectively. The results showed that at a low CNF content of 0.3 wt%, the particle size of the WPU emulsion and chemical structure of the film did not change significantly. In addition, the tensile strength of the composite film increased by up to 108% compared to the neat WPU film, and the thermal stability and water resistance were slightly improved. The addition of CNF greatly enhanced the tensile strength while maintaining the other original properties of the WPU film, which may greatly improve the service life and tear resistance of commercial coatings in the future.Keywords
This publication has 17 references indexed in Scilit:
- New Approach for the Fabrication of Carboxymethyl Cellulose Nanofibrils and the Reinforcement Effect in Water-Borne PolyurethaneACS Sustainable Chemistry & Engineering, 2019
- Characterization of structure and stability of emulsions stabilized with cellulose macro/nano particlesCarbohydrate Polymers, 2018
- Waterborne acrylic–cellulose nanofibrils nanocomposite latexes via miniemulsion polymerizationProgress in Organic Coatings, 2017
- TEMPO-oxidized cellulose nanofibers (TOCNs) as a green reinforcement for waterborne polyurethane coating (WPU) on woodCarbohydrate Polymers, 2016
- Click Cross-Linking-Improved Waterborne Polymers for Environment-Friendly Coatings and AdhesivesACS Applied Materials & Interfaces, 2016
- Influence of cellulose nanofibrils on soft and hard segments of polyurethane/cellulose nanocomposites and effect of humidity on their mechanical propertiesPolymer Testing, 2014
- Reduction of the Water Wettability of Cellulose Film through Controlled Heterogeneous ModificationACS Applied Materials & Interfaces, 2014
- Key advances in the chemical modification of nanocellulosesChemical Society Reviews, 2013
- Microencapsulated probiotics using emulsification technique coupled with internal or external gelation processCarbohydrate Polymers, 2013
- One-pot polymerization, surface grafting, and processing of waterborne polyurethane-cellulose nanocrystal nanocompositesJournal of Materials Chemistry, 2009