Parametric study of a bubble removing device for hemodialysis
Open Access
- 1 April 2023
- journal article
- research article
- Published by Springer Nature in BMC Biomedical Engineering
- Vol. 5 (1) , 1-12
Abstract
This paper sets out to design a device for removing bubbles during the process of hemodialysis. The concept is to guide the bubbles while traveling through the device and eventually the bubbles can be collected. The design focuses on the analysis of various parameters i.e. inlet diameter, inlet velocity and size of the pitch. The initial diameters of Models 1 and 2 have thread regions of 6 and 10 mm, respectively. Parameters: Swirl number, Taylor number, Lift coefficient along with pressure field are also implemented. Based on computational fluid dynamics analysis, the bubbles' average maximum equilibrium position for Model 1 reached 1.995 mm, being greater than that of Model 2, which attained 1.833 mm. Then, 16,000 bubbles were released into Model 1 to validate the performance of the model. This number of bubbles is typically found in the dialysis. Thus, it was found that 81.53% of bubbles passed through the radial region of 2.20 ± 0.30 mm. The appropriate collecting plane was at 100 mm, as measured from the inlet position along the axial axis. The Taylor number, Lift coefficient, and Swirl number proved to be significant parameters for describing the movement of the bubbles. Results were based on multiple inlet velocities. It is seen that Model 3, the improved model with unequal pitch, reached a maximum equilibrium position of 2.24 mm. Overall, results demonstrated that Model 1 was the best design compared to Models 2 and 3. Model 1 was found capable of guiding the bubbles to the edge location and did not generate extra bubbles. Thus, the parametric study, herein, can be used as a prototype for removing bubbles during the process of hemodialysis.Keywords
Funding Information
- Thailand Science Research and Innovation (64A306000032)
This publication has 22 references indexed in Scilit:
- Observation of microbubbles during standard dialysis treatmentsClinical Kidney Journal, 2015
- Effectiveness of microbubble removal in an airtrap with a free surface interfaceJournal of Biomechanics, 2015
- Experimental study and numerical optimization on a vane-type separator for bubble separation in TMSRProgress in Nuclear Energy, 2014
- Magnetic Field Effects on 3D Blood Flow Patterns of Straight and Stenotic ArteriesAdvanced Science Letters, 2013
- Two‐Dimensional Computational Analysis of Microbubbles in HemodialysisArtificial Organs, 2013
- Numerical simulations of swirling pipe flows- decay of swirl and occurrence of vortex structuresJournal of Physics: Conference Series, 2011
- Air Removal Efficiency of a Venous Bubble Trap in a Minimal Extracorporeal Circuit During Coronary Artery Bypass GraftingArtificial Organs, 2010
- Reviews: Pathophysiology and Clinical Implications of Microbubbles during HemodialysisSeminars in Dialysis, 2008
- Drag and lift forces on bubbles in a rotating flowJournal of Fluid Mechanics, 2007
- BLOOD FLOW IN ARTERIESAnnual Review of Fluid Mechanics, 1997