Laboratory Experiments on the In Situ Upgrading of Heavy Crude Oil Using Catalytic Aquathermolysis by Acidic Ionic Liquid
Open Access
Abstract
Heavy and extra heavy oil exploitation has attracted attention in the last few years because of the decline in the production of conventional crude oil. The high viscosity of heavy crude oil is the main challenge that obstructs its extraction. Consequently, catalytic aquathermolysis may be an effective solution to upgrade heavy crude oil to decrease its viscosity in reservoir conditions. In this regard, a series of acidic ionic liquids, 1-butyl-1H-imidazol-3-ium 4-dodecylbenzenesulfonate (IL-4), 1-decyl-1H-imidazol-3-ium 4-dodecylbenzenesulfonate (IL-10), and 1-hexadecyl-1H-imidazol-3-ium 4-dodecylbenzenesulfonate (IL-16), were utilized in the aquathermolysis of heavy crude oil. Of each IL, 0.09 wt % reduced the viscosity of the crude oil by 89%, 93.7%, and 94.3%, respectively, after the addition of 30% water at 175 °C. ILs with alkyl chains equal to 10 carbon atoms or more displayed greater activity in viscosity reduction than that of ILs with alkyl chains lower than 10 carbon atoms. The molecular weight and asphaltene content of the crude oil were decreased after catalytic aquathermolysis. The compositional analysis of the crude oil before and after catalytic aquathermolysis showed that the molar percentage of lighter molecules from tridecanes to isosanes was increased by 26–45%, while heavier molecules such as heptatriacontanes, octatriacontanes, nonatriacontanes, and tetracontanes disappeared. The rheological behavior of the crude oil before and after the catalytic aquathermolytic process was studied, and the viscosity of the crude oil sample was reduced strongly from 678, 29.7, and 23.4 cp to 71.8, 16.9, and 2.7 cp at 25, 50, and 75 °C, respectively. The used ILs upgraded the heavy crude oil at a relatively low temperature.Keywords
Funding Information
- Deanship of Scientific Research, King Abdulaziz University (G-1436-363-386)
This publication has 58 references indexed in Scilit:
- A new reaction model for aquathermolysis of Athabasca bitumenThe Canadian Journal of Chemical Engineering, 2012
- Gemini catalyst for catalytic aquathermolysis of heavy oilJournal of Analytical and Applied Pyrolysis, 2010
- Hydrocarbon Depletion of Athabasca Core at Near Steam-Assisted Gravity Drainage (SAGD) ConditionsEnergy & Fuels, 2010
- Interfacial shear rheology of asphaltenes at oil–water interface and its relation to emulsion stability: Influence of concentration, solvent aromaticity and nonionic surfactantColloids and Surfaces A: Physicochemical and Engineering Aspects, 2010
- Catalytic Aquathermolysis Used for Viscosity Reduction of Heavy Crude Oils: A ReviewEnergy & Fuels, 2010
- The viscosity reduction of nano-keggin-K3PMo12O40 in catalytic aquathermolysis of heavy oilFuel, 2009
- Laboratory Experiments and Field Tests of an Amphiphilic Metallic Chelate for Catalytic Aquathermolysis of Heavy OilEnergy & Fuels, 2008
- Biological upgrading of heavy crude oilBiotechnology and Bioprocess Engineering, 2005
- The catalytic effects of minerals on aquathermolysis of heavy oilsFuel, 2004
- In-situ combustion laboratory studies of Turkish heavy oil reservoirsFuel Processing Technology, 2001