Experiments on Pool Boiling of Water from Downward-Facing Hemispheres

Authors:

Abstract
Quenching experiments were conducted to investigate pool boiling of saturated water on downward-facing aluminum and 303e stainless steel hemispheres. Test sections had an outer diameter of 0.152 m and a wall thickness of 0.020 m. Destabilization of film boiling and wetting of the stainless steel surface occurred earlier than with aluminum (15 s versus 92 s), at 20 K higher wall superheat and ~10% higher minimum film boiling heat flux qmin. Wetting of the stainless steel surface occurred first near the edge of the test section and then gradually propagated azimuthally inward, followed by the maximum heat flux (MHF) front. Conversely, wetting of the aluminum surface occurred first at the lowermost position (θ = 0 deg) and then propagated azimuthally outward. The azimuthal propagation of the MHF front on the stainless steel surface (~5 deg/s for 60 deg < θ < 90 deg decreasing to ~1.8 deg/s for 10 deg < θ < 60 deg and then increasing slightly to ~2 deg/s for 0 deg < θ < 60 deg) was much slower than on...

This publication has 7 references indexed in Scilit: