Solar Selective Absorber Coating with Multilayer Infrared Reflector for Receiver Tubes Operating up to 550 °C
Open Access
Abstract
This work presents a modular W/Ag/AlN infrared reflector for solar selective absorber coatings (SSACs) intended for CSP/CST receiver tubes operating under vacuum at 550 °C. Optical analyses showed that AlN deposition preserved Ag infrared reflectance. Two Ag/AlN bilayers reduced the W reflector’s hemispherical emittance from 7.5% to 2.9%, calculated from room-temperature reflectance weighted at 550 °C. The reflector was first integrated into an SSAC for durability assessment. Accelerated aging under vacuum at 620, 650, and 690 °C yielded an Arrhenius activation energy of 497 kJ/mol and predicted an emittance increase of 0.34 percentage points after 25 years at 550 °C (8 h/day). An optimized SSAC subsequently achieved 95.2% solar absorptance and 11.3% hemispherical emittance on stainless steel, based on room-temperature reflectance. Simulations incorporating temperature-dependent optical properties estimated an emittance of 13.4% at 550 °C, versus 14.7% for a W-based coating. The previous Ag-based coating had lower estimated emittance (11.0%) but required three times more Ag. A 96 h aging test at 650 °C showed that the optimized SSAC exhibited an emittance degradation rate comparable to those of the samples of the coating used in the durability study, supporting the long-term stability prediction for the optimized architecture.Keywords
Funding Information
- Ministero dell’Università e della Ricerca (1561 of 11.10.2022)
- European Commission (PE0000021)
This publication has 33 references indexed in Scilit:
- High-entropy carbide-based multicolor solar selective absorption coatings for enhanced photothermal conversion on rigid and flexible substratesJournal of Alloys and Compounds, 2025
- Advanced coatings and structures for enhancing concentrating solar power efficiencyRenewable and Sustainable Energy Reviews, 2024
- Enhanced high-temperature thermal stability of the novel MoAlSiN-based solar selective absorbing coatings by optimizing the multilayer structureMaterials Today Sustainability, 2023
- Solar thermal harvesting based on self-doped nanocermet: Structural merits, design strategies and applicationsRenewable and Sustainable Energy Reviews, 2020
- Solution‐Processed All‐Ceramic Plasmonic Metamaterials for Efficient Solar–Thermal Conversion over 100–727 °CAdvanced Materials, 2020
- A review of high-temperature selective absorbing coatings for solar thermal applicationsJournal of Materiomics, 2020
- Specific phase modulation and infrared photon confinement in solar selective absorbersApplied Materials Today, 2020
- Enhanced thermal stability of ZrAlSiN cermet-based solar selective absorbing coatings via adding silicon elementMaterials Today Physics, 2019
- Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: A critical reviewRenewable and Sustainable Energy Reviews, 2017
- Optimization and preparation of Pt–Al2O3 double cermet as selective solar absorber coatingsJournal of Alloys and Compounds, 2016