Numerical Study of the Effect of Hybrid Nanofluid Volume Fractions on the Thermal Hydraulic Efficiency of a Concentric Double Pipe Heat Exchanger
Authors:
- Raman PitchandiRPRaman Pitchandi
- Vijayakumar ThulasiVTVijayakumar Thulasi
Preprint
- 3 March 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
A key problem in sustainable thermal system design is to improve the efficiency of heat transfer. The application of nanofluids, especially the hybrid nanofluids has become a promising method of enhancing the performance of heat exchangers because of their great thermophysical characteristics. This paper has presented a numerical analysis to determine the rate of heat transfer, the overall heat transfer coefficient, and pressure drop of four hybrid nanofluids namely CNT-SiC/water, MgO-Fe3O4/water, Al2O3-TiO2/water and CuO-SiO2/water in the counter-flow concentric pipe heat exchanger in turbulent flow regime. The simulations were carried out with Reynolds numbers that ranged between 2000 and 15000 and volume fractions of 2, 4, and 6 percent.The findings show that Reynolds number and concentration of nanoparticles have a strong effect on thermal performance. The overall heat transfer coefficient of CNT-SiC/water, MgO-Fe3O4/water, CuO-SiO2/water and Al2O3-TiO2/water enhanced by 34.27, 30.66, 28.27 and 27.39 percent respectively than pure water at 6% of volume concentration. Accordingly, the rate of heat transfer was enhanced by 26.18%, 23.31%, 21.48%, and 20.85%. CNT-SiC/water hybrid nanofluids showed the most significant thermal enhancement among the considered fluids that were studied. The results confirm that hybrid nanofluids considerably enhance the heat transfer performance at the expense of increased pressure loss with a significant level of importance of thermal-hydraulic optimization in practice.Keywords
This publication has 33 references indexed in Scilit:
- Fundamentals of Heat Transfer2023
- Heat transfer, friction factor and exergy efficiency analysis of nanodiamond-Fe3O4/water hybrid nanofluids in a tube with twisted tape insertsAin Shams Engineering Journal, 2022
- Numerical analysis of turbulence-inducing elements with various geometries and utilization of hybrid nanoparticles in a double pipe heat exchangerAlexandria Engineering Journal, 2022
- Numerical analysis on heat transfer performance of industrial double-tube heat exchanger using CNT: Newtonian/non-Newtonian hybrid nanofluidsJournal of Thermal Analysis and Calorimetry, 2022
- Experimental and numerical study of heat transfer and friction factor of plain tube with hybrid nanofluidsCase Studies in Thermal Engineering, 2020
- Improving hydrothermal performance of hybrid nanofluid in double tube heat exchanger using tapered wire coil turbulatorAdvanced Powder Technology, 2020
- Experimental analyses on heat transfer performance of TiO2–water nanofluid in double-pipe counter-flow heat exchanger for various flow regimesJournal of Thermal Analysis and Calorimetry, 2019
- Investigation of turbulent heat transfer and nanofluid flow in a double pipe heat exchangerAdvanced Powder Technology, 2018
- CFD applications in various heat exchangers design: A reviewApplied Thermal Engineering, 2012
- Tube side heat transfer coefficient and friction factor characteristics of horizontal tubes with helical ribEnergy Conversion and Management, 2006