Optimization study on the influence of little blades’ spatial position on a compressor cascade performance
- 31 October 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 236 (9) , 1799-1816
Abstract
To reveal the importance of little blades’ spatial position to improve the cascade performance at different condition, the pitchwise and axial direction of the little blades on the end-wall are adopted as the optimization variables to complete a double-objective optimization. Meanwhile, the three-dimensional flow field characteristics of the cascade with and without little blades are analyzed comparatively. The study found that as the optimal solutions are obtained at the three bigger incidences (3°, 5°, and 7°), the optimal position is always close to the leading edge of blade and far away from the blade suction surface, and the more intuitive design suggestions are given in this article. Moreover, at the near design conditions (−1°, 0°, and 1°), little blades increase the total pressure loss and reduce the static pressure, which are considered unsuitable for improving the cascade performance. If the stable operation range are the main performance indicators, the optimization of the little blades’ spatial position should be completed at the near stall condition (7° incidence). If the conditions with mid-range incidences (2°< i Opt_Act3, Opt_Act5, and Opt_Act7), the induced vortices resist the effect of axial reverse pressure gradient and pass through the blade passage, which is the main reason for the total pressure loss reduction. Appropriate spatial position of little blades not only strengthens the capability to prevent the low-energy fluids accumulating in the corner region near the end-wall, but exhibits sufficient advantage to weaken the boundary layer.Keywords
Funding Information
- Civil Aviation Flight Technology and Key Laboratory of Flight Safety (FZ2020ZZ01)
- Civil Aviation Flight University of China Scientific Research Fund (J2021-012, J2021-038)
This publication has 19 references indexed in Scilit:
- Competing Three-Dimensional Mechanisms in Compressor FlowsJournal of Turbomachinery, 2016
- Influences of Design Parameters on a Double Serpentine Convergent NozzleJournal of Engineering for Gas Turbines and Power, 2016
- An improved micro-vortex generator in supersonic flowsAerospace Science and Technology, 2015
- Numerical investigation of inlet boundary layer skew in axial-flow compressor cascade and the corresponding non-axisymmetric end wall profilingProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2014
- Simulations of a Compressor Cascade with Steady Secondary Flow Suction2013
- A Prediction Model for Corner Separation/Stall in Axial Compressors2010
- Performance of Strongly Bowed Stators in a Four-Stage High-Speed CompressorJournal of Turbomachinery, 2004
- Axial Compressor Aerodesign Evolution at General ElectricJournal of Turbomachinery, 2002
- Control of turbulent boundary-layer separation using micro-vortex generators1999
- The 1993 IGTI Scholar Lecture: Loss Mechanisms in TurbomachinesJournal of Turbomachinery, 1993