Mechanical Recycling of Post-Industrial PC/ABS Blends from the Automotive Sector by Mixture Design
Open Access
Abstract
The widespread use of plastic materials poses significant environmental challenges, which have promoted a growing call for a circular approach to such materials, emphasizing waste reintegration into production. From this perspective, the present study focuses on analyzing a post-industrial recycled stream of chrome-plated automotive scraps composed of acrylonitrile–butadiene–styrene (ABS), polycarbonate (PC), and a commercial PC/ABS blend. The batch-to-batch varying proportions of these constituents make control of the recycled materials’ quality challenging. To address this problem, we formulated an I-optimal mixture design model using the infrared absorbance ratio of selected peaks and Izod impact resistance results for injection-molded samples as inputs to determine the composition of each batch quickly. The two model equations (adjusted R2 > 0.97) obtained, based on cubic expression and regressed from data obtained from 27 mixtures with known compositions, were combined into a single system for the determination of unknown batch compositions. The validation test showed that the models can satisfactorily predict both the infrared and Izod results of blends with known compositions, but in the latter case, the results are less reliable, probably due to specific blend morphological interactions according to specific compositions. The results can improve mechanical recycling methodologies for reintroducing plastic wastes to the market.Keywords
Funding Information
- LaPrima Plastics
This publication has 40 references indexed in Scilit:
- Characterization of Bisphenol a Poly(Carbonate) after Multiple Processing CyclesAdvanced Materials Research, 2010
- Effect of reprocessing and accelerated ageing on thermal and mechanical polycarbonate propertiesJournal of Materials Processing Technology, 2010
- Recycling and recovery routes of plastic solid waste (PSW): A reviewWaste Management, 2009
- Plastics, the environment and human health: current consensus and future trendsPhilosophical Transactions of the Royal Society B: Biological Sciences, 2009
- An FTIR standard addition method for quantification of bound styrene in its copolymersPolymer Testing, 2008
- Reprocessing acrylonitrile–butadiene–styrene plastics: Structure–property relationshipsPolymer Engineering & Science, 2007
- Influence of ABS type on morphology and mechanical properties of PC/ABS blendsJournal of Applied Polymer Science, 1994
- Determination by pyrolysis gas chromatography of the composition of materials based on styrene copolymers and of blends ABS-polycarbonatePolymer Science U.S.S.R., 1990
- Mechanical properties of ABS/polycarbonate blendsJournal of Applied Polymer Science, 1984
- Reprocessing of thermoplastics. II. PolycarbonatePolymer Engineering & Science, 1980