Abrasion Resistance of Ultra-High-Performance Concrete for Railway Sleepers
Open Access
- 17 April 2021
- journal article
- research article
- Published by Springer Nature in Urban Rail Transit
- Vol. 7 (2) , 101-116
Abstract
This study aimed to determine the abrasion resistance of ultra-high-performance concretes (UHPCs) for railway sleepers. Test samples were made with different cementitious material combinations and varying steel fiber contents and shapes, using conventional fine aggregate. A total of 25 UHPCs and two high-strength concretes (HSCs) were selected to evaluate their depth of wear and bulk properties. The results of the coefficient of variation (CV), relative gain in abrasion, and abrasion index of the studied UHPCs were also obtained and discussed. Furthermore, a comparison was made on the resistance to wear of the selected UHPCs with those of the HSCs typically used for prestressed concrete sleepers. The outcomes of this study revealed that UHPCs displayed excellent resistance against abrasion, well above that of HSCs. Amongst the utilized cementitious material combinations, UHPCs made with silica fume as a partial replacement of cement performed best against abrasion, whereas mixtures containing fly ash showed the highest depth of wear. The addition of steel fibers had a more positive influence on the abrasion resistance than it did on compressive strength of the studied UHPCs.Keywords
Funding Information
- U.S. Department of Transportation (GR09035)
This publication has 34 references indexed in Scilit:
- Flexural cracking-induced acoustic emission peak frequency shift in railway prestressed concrete sleepersEngineering Structures, 2019
- Environmental and Track Factors That Contribute to Abrasion Damage2018
- Fatigue of steel-fibre-reinforced concrete prestressed railway sleepersEngineering Structures, 2017
- High performance concrete requirements for prefabricated high speed railway sleepersConstruction and Building Materials, 2017
- Experimental load rating of aged railway concrete sleepersEngineering Structures, 2014
- Failures of mainline railway sleepers and suggested remedies – Review of current practiceEngineering Failure Analysis, 2014
- Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concreteConstruction and Building Materials, 2011
- A review of alternative materials for replacing existing timber sleepersComposite Structures, 2010
- Progressive failure of prestressed concrete sleepers under multiple high-intensity impact loadsEngineering Structures, 2009
- Near-surface characteristics of concrete: abrasion resistanceMaterials and Structures, 1991