Characterization of Polyamide 6/Multilayer Graphene Nanoplatelet Composite Textile Filaments Obtained Via In Situ Polymerization and Melt Spinning
Authors:
- Jelena VasiljevićJelena Vasiljević
- Andrej DemšarADAndrej Demšar
- Mirjam LeskovšekMLMirjam Leskovšek
- Barbara SimončičBarbara Simončič
- Nataša Čelan KorošinNataša Čelan Korošin
- Ivan JermanIvan Jerman
- Matic ŠobakMŠMatic Šobak
- Gregor ŽitkoGŽGregor Žitko
- Nigel Van de VeldeNVNigel Van de Velde
- Marija ČolovićMČMarija Čolović
Open Access
Abstract
Studies of the production of fiber-forming polyamide 6 (PA6)/graphene composite material and melt-spun textile fibers are scarce, but research to date reveals that achieving the high dispersion state of graphene is the main challenge to nanocomposite production. Considering the significant progress made in the industrial mass production of graphene nanoplatelets (GnPs), this study explored the feasibility of production of PA6/GnPs composite fibers using the commercially available few-layer GnPs. To this aim, the GnPs were pre-dispersed in molten ε-caprolactam at concentrations equal to 1 and 2 wt %, and incorporated into the PA6 matrix by the in situ water-catalyzed ring-opening polymerization of ε-caprolactam, which was followed by melt spinning. The results showed that the incorporated GnPs did not markedly influence the melting temperature of PA6 but affected the crystallization temperature, fiber bulk structure, crystallinity, and mechanical properties. Furthermore, GnPs increased the PA6 complex viscosity, which resulted in the need to adjust the parameters of melt spinning to enable continuous filament production. Although the incorporation of GnPs did not provide a reinforcing effect of PA6 fibers and reduced fiber tensile properties, the thermal stability of the PA6 fiber increased. The increased melt viscosity and graphene anti-dripping properties postponed melt dripping in the vertical flame spread test, which consequently prolonged burning within the samples.Keywords
Funding Information
- The Slovenian Research and Innovation Agency (Z2-9250, P2-0213, P2-0393, P1-0134)
This publication has 48 references indexed in Scilit:
- Flame retardancy through carbon nanomaterials: Carbon black, multiwall nanotubes, expanded graphite, multi-layer graphene and graphene in polypropylenePolymer Degradation and Stability, 2013
- The production of a melt-spun functionalized graphene/poly(ε-caprolactam) nanocomposite fiberComposites Science and Technology, 2013
- Fabrication and characterization of polyamide 6-functionalized graphene nanocomposite fiberJournal of Materials Science, 2012
- Rheological and electrical percolation thresholds of carbon nanotube/polymer nanocompositesPolymer Engineering & Science, 2012
- In situ Polymerization Approach to Graphene-Reinforced Nylon-6 CompositesMacromolecules, 2010
- Isothermal crystallization kinetics and melting behavior of multiwalled carbon nanotubes/polyamide‐6 compositesJournal of Applied Polymer Science, 2007
- Hydrogen bonding, mobility, and structural transitions in aliphatic polyamidesJournal of Polymer Science Part B: Polymer Physics, 2006
- Anionic polymerization of lactams: A comparative study on various methods of measuring the conversion of ε‐caprolactam to polyamide 6Journal of Applied Polymer Science, 2006
- Influence of particle size and shape on electrical and mechanical properties of graphite reinforced conductive polymer composites for the bipolar plate of PEM fuel cellsAdvanced Composite Materials, 2006
- The application of Fourier transform Raman spectroscopy to the identification and characterization of polyamides—I. Single number nylonsSpectrochimica Acta Part A: Molecular Spectroscopy, 1990