Jelena Vasiljević
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jelena Vasiljević has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Barbara Simončič
Department of Textiles, Faculty of Natural Sciences and Engineering, University of Ljubljana, Aškerčeva 12, 1000 Ljubljana, Slovenia
26 shared publications - Ivan Jerman
National Institute of Chemistry, Ljubljana, Slovenia
21 shared publications Brigita Tomšič
Faculty of Natural Sciences and Engineering Ljubljana University of Ljubljana Ljubljana Slovenia
11 shared publicationsJožef Medved
9 shared publicationsBoris Orel
National Institute of Chemistry, Ljubljana, Slovenia
6 shared publicationsAlisa Šehić
AquafilSLO d.o.o. Letališka 15, 1000 Ljubljana Slovenia
4 shared publications
Latest Publications
- Open Access
Graphitic Carbon Nitride as a New Sustainable Photocatalyst for Textile Functionalization
As a promising organic semiconducting material, polymeric graphitic carbon nitride (g-C3N4) has attracted much attention due to its excellent optical and photoelectrochemical properties, thermal stability, chemical inertness, nontoxicity, abundance, and low cost. Its advantageous visible light-induced photocatalytic activity has already been beneficially used in the fields of environmental remediation, biological applications, healthcare, energy conversion and storage, and fuel production. Despite the recognized potential of g-C3N4, there is still a knowledge gap in the application of g-C3N4 in the field of textiles, with no published reviews on the g-C3N4-functionalization of textile materials. Therefore, this review article aims to provide a critical overview of recent advances in the surface and bulk modification of textile fibres by g-C3N4 and its composites to tailor photocatalytic self-cleaning, antibacterial, and flame retardant properties as well as to create a textile catalytic platform for water disinfection, the removal of various organic pollutants from water, and selective organic transformations. This paper highlights the possibilities of producing g-C3N4-functionalized textile substrates and suggests some future prospects for this research area.
Open AccessGraphitic Carbon Nitride as a New Sustainable Photocatalyst for Textile Functionalization
As a promising organic semiconducting material, polymeric graphitic carbon nitride (g-C3N4) has attracted much attention due to its excellent optical and photoelectrochemical properties, thermal stability, chemical inertness, nontoxicity, abundance, and low cost. Its advantageous visible light-induced photocatalytic activity has already been beneficially used in the fields of environmental remediation, biological applications, healthcare, energy conversion and storage, and fuel production. Despite the recognized potential of g-C3N4, there is still a knowledge gap in the application of g-C3N4 in the field of textiles, with no published reviews on the g-C3N4-functionalization of textile materials. Therefore, this review article aims to provide a critical overview of recent advances in the surface and bulk modification of textile fibres by g-C3N4 and its composites to tailor photocatalytic self-cleaning, antibacterial, and flame retardant properties as well as to create a textile catalytic platform for water disinfection, the removal of various organic pollutants from water, and selective organic transformations. This paper highlights the possibilities of producing g-C3N4-functionalized textile substrates and suggests some future prospects for this research area.
- Open Access
New Insights into Antibacterial and Antifungal Properties, Cytotoxicity and Aquatic Ecotoxicity of Flame Retardant PA6/DOPO-Derivative Nanocomposite Textile Fibers
The aim of this study was to evaluate the antibacterial and antifungal activity, cytotoxicity, leaching, and ecotoxicity of novel flame retardant polyamide 6 (PA6) textile fibers developed by our research group. The textile fibers were produced by the incorporation of flame-retardant bridged 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivative (PHED) in the PA6 matrix during the in situ polymerization process at concentrations equal to 10 and 15 wt% (PA6/10PHED and PA6/15PHED, respectively). Whilst the nanodispersed PHED provided highly efficient flame retardancy, its biological activity led to excellent antibacterial activity against Escherichia coli and Staphylococcus aureus, as well as excellent antifungal activity against Aspergillus niger and Candida albicans. The results confirmed leaching of the PHED, but the tested leachates did not cause any measurable toxic effect to the duckweed Lemna minor. The in vitro cytotoxicity of the leached PHED from the PA6/15PHED sample was confirmed for human cells from adipose tissue in direct and prolonged contact. The targeted biological activity of the organophosphinate flame retardant could be beneficial for the development of PA6 textile materials with multifunctional properties and the low ecotoxicity profile, while the PHED’s leaching and cytotoxicity limit their application involving the washing processes and direct contact with the skin.
Open AccessNew Insights into Antibacterial and Antifungal Properties, Cytotoxicity and Aquatic Ecotoxicity of Flame Retardant PA6/DOPO-Derivative Nanocomposite Textile Fibers
The aim of this study was to evaluate the antibacterial and antifungal activity, cytotoxicity, leaching, and ecotoxicity of novel flame retardant polyamide 6 (PA6) textile fibers developed by our research group. The textile fibers were produced by the incorporation of flame-retardant bridged 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivative (PHED) in the PA6 matrix during the in situ polymerization process at concentrations equal to 10 and 15 wt% (PA6/10PHED and PA6/15PHED, respectively). Whilst the nanodispersed PHED provided highly efficient flame retardancy, its biological activity led to excellent antibacterial activity against Escherichia coli and Staphylococcus aureus, as well as excellent antifungal activity against Aspergillus niger and Candida albicans. The results confirmed leaching of the PHED, but the tested leachates did not cause any measurable toxic effect to the duckweed Lemna minor. The in vitro cytotoxicity of the leached PHED from the PA6/15PHED sample was confirmed for human cells from adipose tissue in direct and prolonged contact. The targeted biological activity of the organophosphinate flame retardant could be beneficial for the development of PA6 textile materials with multifunctional properties and the low ecotoxicity profile, while the PHED’s leaching and cytotoxicity limit their application involving the washing processes and direct contact with the skin.
- Open Access
Characterization of Polyamide 6/Multilayer Graphene Nanoplatelet Composite Textile Filaments Obtained Via In Situ Polymerization and Melt Spinning
Studies of the production of fiber-forming polyamide 6 (PA6)/graphene composite material and melt-spun textile fibers are scarce, but research to date reveals that achieving the high dispersion state of graphene is the main challenge to nanocomposite production. Considering the significant progress made in the industrial mass production of graphene nanoplatelets (GnPs), this study explored the feasibility of production of PA6/GnPs composite fibers using the commercially available few-layer GnPs. To this aim, the GnPs were pre-dispersed in molten ε-caprolactam at concentrations equal to 1 and 2 wt %, and incorporated into the PA6 matrix by the in situ water-catalyzed ring-opening polymerization of ε-caprolactam, which was followed by melt spinning. The results showed that the incorporated GnPs did not markedly influence the melting temperature of PA6 but affected the crystallization temperature, fiber bulk structure, crystallinity, and mechanical properties. Furthermore, GnPs increased the PA6 complex viscosity, which resulted in the need to adjust the parameters of melt spinning to enable continuous filament production. Although the incorporation of GnPs did not provide a reinforcing effect of PA6 fibers and reduced fiber tensile properties, the thermal stability of the PA6 fiber increased. The increased melt viscosity and graphene anti-dripping properties postponed melt dripping in the vertical flame spread test, which consequently prolonged burning within the samples.
Open AccessCharacterization of Polyamide 6/Multilayer Graphene Nanoplatelet Composite Textile Filaments Obtained Via In Situ Polymerization and Melt Spinning
Studies of the production of fiber-forming polyamide 6 (PA6)/graphene composite material and melt-spun textile fibers are scarce, but research to date reveals that achieving the high dispersion state of graphene is the main challenge to nanocomposite production. Considering the significant progress made in the industrial mass production of graphene nanoplatelets (GnPs), this study explored the feasibility of production of PA6/GnPs composite fibers using the commercially available few-layer GnPs. To this aim, the GnPs were pre-dispersed in molten ε-caprolactam at concentrations equal to 1 and 2 wt %, and incorporated into the PA6 matrix by the in situ water-catalyzed ring-opening polymerization of ε-caprolactam, which was followed by melt spinning. The results showed that the incorporated GnPs did not markedly influence the melting temperature of PA6 but affected the crystallization temperature, fiber bulk structure, crystallinity, and mechanical properties. Furthermore, GnPs increased the PA6 complex viscosity, which resulted in the need to adjust the parameters of melt spinning to enable continuous filament production. Although the incorporation of GnPs did not provide a reinforcing effect of PA6 fibers and reduced fiber tensile properties, the thermal stability of the PA6 fiber increased. The increased melt viscosity and graphene anti-dripping properties postponed melt dripping in the vertical flame spread test, which consequently prolonged burning within the samples.
- Open Access
Effect of Different Flame-Retardant Bridged DOPO Derivatives on Properties of in Situ Produced Fiber-Forming Polyamide 6
The production of sustainable and effective flame retardant (FR) polyamide 6 (PA6) fibrous materials requires the establishment of a novel approach for the production of polyamide 6/FR nanodispersed systems. This research work explores the influence of three different flame-retardant bridged 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivatives on the comprehensive properties of in situ produced PA6/FR systems. To this end, in situ water-catalyzed ring-opening polymerization of ε-caprolactam was conducted in the presence of three different bridged DOPO derivatives, e.g., one P−N bond phosphonamidate derivative and two P−C bond phosphinate derivatives. The selected bridged DOPO derivatives mainly act in the gas phase at the temperatures that relatively match the PA6 pyrolysis specifics. The effects of the FRs on the dispersion state, morphological, molecular, structural, melt-rheological, and thermal properties of the in situ synthesized PA6 were evaluated. The specific advantage of this approach is one-step production of PA6 with uniformly distributed nanodispersed FR, which was obtained in the case of all three applied FRs. However, the applied FRs differently interacted with monomer and polymer during the polymerization, which was reflected in the length of PA6 chains, crystalline structure, and melt-rheological properties. The applied FRs provided a comparable effect on the thermal stability of PA6 and stabilization of the PA6/FR systems above 450 °C in the oxygen-assisted pyrolysis. However, only with the specifically designed FR molecule were the comprehensive properties of the fiber-forming PA6 satisfied for the continuous conduction of the melt-spinning process.
Open AccessEffect of Different Flame-Retardant Bridged DOPO Derivatives on Properties of in Situ Produced Fiber-Forming Polyamide 6
The production of sustainable and effective flame retardant (FR) polyamide 6 (PA6) fibrous materials requires the establishment of a novel approach for the production of polyamide 6/FR nanodispersed systems. This research work explores the influence of three different flame-retardant bridged 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivatives on the comprehensive properties of in situ produced PA6/FR systems. To this end, in situ water-catalyzed ring-opening polymerization of ε-caprolactam was conducted in the presence of three different bridged DOPO derivatives, e.g., one P−N bond phosphonamidate derivative and two P−C bond phosphinate derivatives. The selected bridged DOPO derivatives mainly act in the gas phase at the temperatures that relatively match the PA6 pyrolysis specifics. The effects of the FRs on the dispersion state, morphological, molecular, structural, melt-rheological, and thermal properties of the in situ synthesized PA6 were evaluated. The specific advantage of this approach is one-step production of PA6 with uniformly distributed nanodispersed FR, which was obtained in the case of all three applied FRs. However, the applied FRs differently interacted with monomer and polymer during the polymerization, which was reflected in the length of PA6 chains, crystalline structure, and melt-rheological properties. The applied FRs provided a comparable effect on the thermal stability of PA6 and stabilization of the PA6/FR systems above 450 °C in the oxygen-assisted pyrolysis. However, only with the specifically designed FR molecule were the comprehensive properties of the fiber-forming PA6 satisfied for the continuous conduction of the melt-spinning process.
- 5 March 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (40)
The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions
A novel impregnation process for the fabrication of cotton nanocomposite with strong antimicrobial activity against antibiotics‐resistant bacteria and yeast was developed. The impregnation process includes the sol–gel treatment of fabric with (3‐aminopropyl)triethoxysilane in the first step, and synthesis of the CuO/Cu2O nanoparticles (NPs) on the fabric surface in the second step. The in situ synthesis of the CuO/Cu2O NPs was based on the adsorption of Cu2+‐ions by the introduced amino groups of the sol–gel coating. The adsorbed Cu2+‐ions are subsequently reduced in the alkaline solution of NaBH4. X‐ray diffraction measurements confirmed the formation of CuO/Cu2O NPs. Scanning electron microscopy and atomic absorption spectrometry analyses indicate that the particle size, agglomeration, and amounts of synthesized NPs were highly affected by the initial concentration of CuSO4solution. The toxicity of nanocomposites to human keratinocytes (HaCaT) and antimicrobial activity against Gram‐negativeEscherichia coliATCC 25922,E. coliATCC BAA 2469, andKlebsiella pneumoniaeATCC BAA 2146, and Gram‐positive bacteriaStaphylococcus aureusATCC 25923,S. aureusATCC 43300 and yeastCandida albicansATCC 24433 strongly depended on the copper content. In addition to excellent antimicrobial activity, controlled release of Cu2+‐ions from the fabrics into physiological saline solution was obtained.
- 5 March 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (40)
The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions
A novel impregnation process for the fabrication of cotton nanocomposite with strong antimicrobial activity against antibiotics‐resistant bacteria and yeast was developed. The impregnation process includes the sol–gel treatment of fabric with (3‐aminopropyl)triethoxysilane in the first step, and synthesis of the CuO/Cu2O nanoparticles (NPs) on the fabric surface in the second step. The in situ synthesis of the CuO/Cu2O NPs was based on the adsorption of Cu2+‐ions by the introduced amino groups of the sol–gel coating. The adsorbed Cu2+‐ions are subsequently reduced in the alkaline solution of NaBH4. X‐ray diffraction measurements confirmed the formation of CuO/Cu2O NPs. Scanning electron microscopy and atomic absorption spectrometry analyses indicate that the particle size, agglomeration, and amounts of synthesized NPs were highly affected by the initial concentration of CuSO4solution. The toxicity of nanocomposites to human keratinocytes (HaCaT) and antimicrobial activity against Gram‐negativeEscherichia coliATCC 25922,E. coliATCC BAA 2469, andKlebsiella pneumoniaeATCC BAA 2146, and Gram‐positive bacteriaStaphylococcus aureusATCC 25923,S. aureusATCC 43300 and yeastCandida albicansATCC 24433 strongly depended on the copper content. In addition to excellent antimicrobial activity, controlled release of Cu2+‐ions from the fabrics into physiological saline solution was obtained.
- Open Access
- 1 August 2019
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 166, 50-59
In situ prepared polyamide 6/DOPO-derivative nanocomposite for melt-spinning of flame retardant textile filaments
- 1 August 2019
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 166, 50-59
Open AccessIn situ prepared polyamide 6/DOPO-derivative nanocomposite for melt-spinning of flame retardant textile filaments
- Open Access
- 1 January 2019
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 84 (7) , 743-755
Biodegradation of cotton fabric impregnated with TiO2 nanoparticles
Commercial P25 TiO2 nanoparticles are widely exploited as an efficient photocatalyst. In the textile domain, these nanoparticles are used for the production of self-cleaning, highly UV protective textiles, with an antimicrobial activity. The disposed textile products may end up in a landfill where they are subjected to the biodegradation process. Considering the importance of the later, this study discusses the biodegradation behaviour of cotton fabric impregnated with commercial P25 TiO2 nanoparticles. Photocatalytic activity of TiO2 nanoparticles immobilized on cotton fabric was proved by the photodegradation of dyes C.I. Acid Orange 7 and methylene blue in aqueous solution. Biodegradation of fabrics was assessed by soil burial test in periods of 3, 9 and 18 days. Chemical and morphological changes induced by biodegradation were analyzed by FTIR, SEM and EDS. A colour of the samples gradually changed from white to yellow/brown due to rotting. SEM analysis revealed a severe destruction of the control and impregnated cotton fibres after 18 days of soil burial which was in line with visual appearance of completely damaged fabrics. The results confirmed that biodegradation behaviour of both the control and impregnated sample was equivalent, indicating that P25 TiO2 nanoparticles did not inhibit the biodegradation process of cellulose.
- 1 January 2019
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 84 (7) , 743-755
Open AccessBiodegradation of cotton fabric impregnated with TiO2 nanoparticles
Commercial P25 TiO2 nanoparticles are widely exploited as an efficient photocatalyst. In the textile domain, these nanoparticles are used for the production of self-cleaning, highly UV protective textiles, with an antimicrobial activity. The disposed textile products may end up in a landfill where they are subjected to the biodegradation process. Considering the importance of the later, this study discusses the biodegradation behaviour of cotton fabric impregnated with commercial P25 TiO2 nanoparticles. Photocatalytic activity of TiO2 nanoparticles immobilized on cotton fabric was proved by the photodegradation of dyes C.I. Acid Orange 7 and methylene blue in aqueous solution. Biodegradation of fabrics was assessed by soil burial test in periods of 3, 9 and 18 days. Chemical and morphological changes induced by biodegradation were analyzed by FTIR, SEM and EDS. A colour of the samples gradually changed from white to yellow/brown due to rotting. SEM analysis revealed a severe destruction of the control and impregnated cotton fibres after 18 days of soil burial which was in line with visual appearance of completely damaged fabrics. The results confirmed that biodegradation behaviour of both the control and impregnated sample was equivalent, indicating that P25 TiO2 nanoparticles did not inhibit the biodegradation process of cellulose.
- 24 September 2018
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (5)
Polyamide 6 composite fibers with incorporated mixtures of melamine cyanurate, carbon nanotubes, and carbon black
Polyamide 6 (PA6) composite filament yarns were produced by the simultaneous incorporation of melamine cyanurate (MeCy) with multiwalled carbon nanotubes (CNTs) and carbon black (CB) into a composite matrix in a melt‐spinning process. The results show that the simultaneous incorporation of MeCy with CNTs or CB additives provided filaments with a uniform black color. Tensile analysis confirmed that a reinforcing effect was achieved when CB was used, whereas the CNTs induced a reducing effect on the filament tenacity. With regard to the burning behavior, the flame‐retardant action of MeCy was preserved in the presence of CB but was significantly hindered when used in combination with CNTs. These results indicate that the mixture of MeCy and CB was much more compatible for the production of reinforced PA6 composite filaments with increased thermal stability and improved flame retardancy over those of the MeCy and CNTs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2019,136, 47007.
- 24 September 2018
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (5)
Polyamide 6 composite fibers with incorporated mixtures of melamine cyanurate, carbon nanotubes, and carbon black
Polyamide 6 (PA6) composite filament yarns were produced by the simultaneous incorporation of melamine cyanurate (MeCy) with multiwalled carbon nanotubes (CNTs) and carbon black (CB) into a composite matrix in a melt‐spinning process. The results show that the simultaneous incorporation of MeCy with CNTs or CB additives provided filaments with a uniform black color. Tensile analysis confirmed that a reinforcing effect was achieved when CB was used, whereas the CNTs induced a reducing effect on the filament tenacity. With regard to the burning behavior, the flame‐retardant action of MeCy was preserved in the presence of CB but was significantly hindered when used in combination with CNTs. These results indicate that the mixture of MeCy and CB was much more compatible for the production of reinforced PA6 composite filaments with increased thermal stability and improved flame retardancy over those of the MeCy and CNTs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2019,136, 47007.
- Open Access
- 27 June 2018
- Published by University of Ljubljana in Tekstilec
- Vol. 61 (2) , 136-148
Recent Advances in Production of Flame Retardant Polyamide 6 Filament Yarns
- 27 June 2018
- Published by University of Ljubljana in Tekstilec
- Vol. 61 (2) , 136-148
Open AccessRecent Advances in Production of Flame Retardant Polyamide 6 Filament Yarns
- 1 June 2018
- Published by Springer Nature in Fibers and Polymers
- Vol. 19 (6) , 1194-1206
Influence of N-, P- and Si-based Flame Retardant Mixtures on Flammability, Thermal Behavior and Mechanical Properties of PA6 Composite Fibers
- 1 June 2018
- Published by Springer Nature in Fibers and Polymers
- Vol. 19 (6) , 1194-1206
Influence of N-, P- and Si-based Flame Retardant Mixtures on Flammability, Thermal Behavior and Mechanical Properties of PA6 Composite Fibers