Oxidation and Corrosion Resistance of NiCr-Re and NiCr-Re-Al2O3 Materials Fabricated by Spark Plasma Sintering
Authors:
Open Access
Abstract
The thermal and oxidation resistance of elements found in the combustion boilers of power generation plants are some of the most important factors deciding their effectiveness. This paper shows the experimental results of the influence of NiCr-based material composition on the microstructure and phase changes occurring during the oxidation and corrosion process. NiCr alloy was modified by the addition of rhenium and aluminum oxide. Materials were densified using the spark plasma sintering method at a sintering temperature of 1050 °C. Oxidation tests conducted up to 1100 °C under synthetic airflow revealed the formation of a thin Cr2O3 layer protecting the material against in-depth oxidation. Results of electrochemical corrosion in a 0.5 M NaCl solution indicated a positive role of Re and Al2O3 addition, confirmed by low corrosion current density values in comparison to the other reference materials. According to the provided positive preliminary test results, we can conclude that a NiCr-Re-Al2O3 system in coating form was successfully obtained by the plasma spraying method.Keywords
Funding Information
- National Centre of Research and Development, Poland (M-ERA.NET2/2016/01/2017)
This publication has 39 references indexed in Scilit:
- High Temperature Corrosion Problem of Boiler Components in presence of Sulfur and Alkali based FuelsHigh Temperature Materials and Processes, 2011
- Thermal reaction of SiC films with Mo, Re and Mo–Re alloyJournal of Alloys and Compounds, 2009
- Consolidation/synthesis of materials by electric current activated/assisted sinteringMaterials Science and Engineering: R: Reports, 2009
- High temperature erosion of Cr3C2-NiCr thermal spray coatings — The role of phase microstructureSurface and Coatings Technology, 2009
- Effect of rhenium addition on the microstructure of the superalloy Inconel 706Acta Materialia, 2008
- Effects of rhenium addition on the temporal evolution of the nanostructure and chemistry of a model Ni–Cr–Al superalloy. II: Analysis of the coarsening behaviorActa Materialia, 2007
- Effects of rhenium addition on the temporal evolution of the nanostructure and chemistry of a model Ni–Cr–Al superalloy. I: Experimental observationsActa Materialia, 2007
- Processing, microstructure and mechanical properties of Al2O3–Cr nanocompositesJournal of the European Ceramic Society, 2007
- Cesium-promoted rhenium catalysts supported on alumina for ammonia synthesisApplied Catalysis A: General, 2003
- Effect of the composition profile and density of LPPS sprayed functionally graded coating on the thermal shock resistanceScience and Technology of Advanced Materials, 2003