Effect of Coal Liquefaction Conditions on the Composition of the Product Oil
- 23 November 2006
- journal article
- research article
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 28 (16) , 1483-1492
Abstract
Two methods, catalyst physically mixing method (method I) and catalyst impregnation method (method II) were employed for Beypazarı and Tunçbilek lignites liquefaction. Fe2O3 and Mo(CO)6 were used as the catalysts. Oils obtained at the end of the catalytic coal liquefaction were qualitatively analyzed by gas chromatography (GC). With solvent/coal ratio increase, compounds with straight chain and high molecular weight were formed. Likewise, as the reaction time and catalyst concentration were increased, the number and the intensity of the compounds in the oils increased partially. Due to the increase in the reaction time, temperature and catalyst concentration, the oils were enriched in straight chain alkanes and aromatic polycyclic compounds. However, alkanes with straight chain were reduced by the effect of pyrolysis at temperatures over 400°C. Retention times of the compounds obtained by method II were higher than those of the compounds obtained by method I. Respectively, the compounds in the oils obtained by method II were found to have been composed by high quantities of high molecular straight chain alkanes and aromatic polycyclic compounds. Our data gave us ground to presume that the oils from both lignites were composed by straight chain alkanes and aromatic polycyclic compounds (tetralin, naphthalene and their derivatives, phenols, xylenols, biphenyl, naphthols, etc.). The oil compositions were strongly influenced by the liquefaction conditions.Keywords
This publication has 23 references indexed in Scilit:
- Solvent degradation during coal liquefaction in a flowing-solvent reactorFuel, 2004
- Determination of benzene and total aromatics in commercial gasolines using packed column GC and NMR techniquesFuel, 2003
- Product analysis of catalytic multi-stage hydropyrolysis of lignite☆Fuel, 2002
- Catalytic dissolution of two Turkish lignites in tetralin under nitrogen atmosphere: effects of the extraction parameters on the conversionFuel, 2001
- In situ impregnated iron-based catalysts for direct coal liquefactionFuel, 1996
- Liquefaction behaviour of solvent-swollen coalsFuel, 1991
- Characterization of polynuclear aromatic hydrocarbons in bitumen, heavy oil fractions boiling above 350 °C by g.c.-m.s.Fuel, 1984
- Effects of solvent and iron-compounds on the liquefaction of brown coalFuel, 1982
- Efficient liquefaction of Australian brown coal with a hydrogen-donating solvent under atmospheric pressureFuel, 1981
- Tetralin vapour pressure at elevated temperaturesFuel, 1981