Thermodynamic analysis of hybrid nanofluid based solar flat plate collector
Authors:
- Ranga Babu J.A.RJRanga Babu J.A.
- Srinivasa Rao S.SSSrinivasa Rao S.
- 12 February 2018
- journal article
- research article
- Published by Emerald Publishing in World Journal of Engineering
- Vol. 15 (1) , 27-39
Abstract
Purpose: This paper aims to present an analytical investigation of energy and exergy performance on a solar flat plate collector (SFPC) with Cu-CuO/water hybrid nanofluid, Cu/water and CuO/water nanofluids as collector running fluids. Design/methodology/approach: Heat transfer characteristics, pressure drop and energy and exergy efficiencies of SFPC working on these nanofluids are investigated and compared. In this study, a comparison is made by varying the mass flow rates and nanoparticle volume concentration. Thermophysical properties of hybrid nanofluids are estimated using distinctive correlations available in the open literature. Then, the influence of these properties on energy and exergy efficiencies of SFPC is discussed in detail. Findings: Energy analysis reveals that by introducing the hybrid nanoparticles in water, the thermal conductivity of the working fluid is enhanced by 17.52 per cent and that of the individual constituents is enhanced by 15.72 and 15.35 per cent for Cu/water and CuO/water nanofluids, respectively. This resulted in 2.16 per cent improvement in useful heat gain for hybrid nanofluid and 1.03 and 0.91 per cent improvement in heat gain for Cu/water and CuO/water nanofluids, respectively. In line with the above, the collector efficiency increased by 2.175 per cent for the hybrid nanofluid and 0.93 and 1.05 per cent enhancement for Cu/water and CuO/water nanofluids, respectively. Exergy analysis elucidates that by using the hybrid nanofluid, exergy efficiency is increased by 2.59 per cent, whereas it is 2.32 and 2.18 per cent enhancement for Cu/water and CuO/water nanofluids, respectively. Entropy generation is reduced by 3.31, 2.35 and 2.96 per cent for Cu-CuO/water, Cu/water and CuO/water nanofluids, respectively, as compared to water. Research limitations/implications: However, this is associated with a penalty of increment in pressure drop of 2.92, 3.09 and 2.74 per cent for Cu-CuO/water, Cu/water and CuO/water nanofluids, respectively, compared with water. Originality/value: It is clear from the analysis that Cu-CuO/water hybrid nanofluids possess notable increment in both energy and exergy efficiencies to use them in SFPCs.Keywords
This publication has 28 references indexed in Scilit:
- An experimental investigation on the effect of MWCNT-H2O nanofluid on the efficiency of flat-plate solar collectorsExperimental Thermal and Fluid Science, 2012
- Synthesis of Al2O3–Cu/water hybrid nanofluids using two step method and its thermo physical propertiesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2011
- Enhanced thermal conductivity of nanofluids: a state-of-the-art reviewMicrofluidics and Nanofluidics, 2009
- Enhancement of fluid thermal conductivity by the addition of single and hybrid nano-additivesThermochimica Acta, 2007
- Review of research and development work on solar dryers for grape dryingEnergy Conversion and Management, 2002
- HYDRODYNAMIC AND HEAT TRANSFER STUDY OF DISPERSED FLUIDS WITH SUBMICRON METALLIC OXIDE PARTICLESExperimental Heat Transfer, 1998
- Thermal performance of flat-plate solar collectors manufactured in IndiaEnergy Conversion and Management, 1991
- General theory of exergy-balance analysis and application to solar collectorsEnergy, 1988
- Second Law Analysis and Synthesis of Solar Collector SystemsJournal of Solar Energy Engineering, 1981
- Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen SubstanzenAnnalen der Physik, 1935