The Effect of Accelerated Ageing on Reaction-to-Fire Properties–Composite Materials
Authors:
Open Access
- 26 November 2021
- journal article
- research article
- Published by Springer Nature in Fire Technology
- Vol. 58 (3) , 1305-1332
Abstract
As material age, the durability, strength, and other mechanical properties are impacted. The lifespan of a material generally decreases when exposed to weathering conditions such as wind, temperature, humidity, and light. It is important to have knowledge of how materials age and how the material properties are affected. Regarding materials´ fire behaviour and the effect of ageing on these properties, the knowledge is limited. The research questions of the current work are: Are the fire properties of composite materials affected by ageing? And if so, how is it affected? The study is on material at Technology Readiness Level 9 (TRL). In this study, three composite fibre laminates developed for marine applications were exposed to accelerated ageing. Two different ageing conditions were selected, thermal ageing with an increased temperature of 90°C and moisture ageing in a moderately increased temperature of 40°C and a relative humidity of 90%. Samples were collected after one, two and four weeks of ageing. The reaction-to-fire properties after ageing was evaluated using the ISO 5660–1 cone calorimeter and the EN ISO 5659–2 smoke chamber with FTIR gas analysis. The test results showed that the fire behaviour was affected. Two of the composite laminates, both phenolic/basalt composites, showed a deteriorated fire behaviour from the thermal ageing and the third composite laminate, a PFA/glass fibre composite, showed an improved fire behaviour both for thermal and moisture ageing. The smoke toxicity was affected by the accelerated ageing, especially for the PFA/glass fibre composite that showed a higher production of CO and HCN, both for the thermal aged and the moisture aged samples.Keywords
Funding Information
- Horizon 2020 Framework Programme (723246)
- RISE Research Institutes of Sweden
This publication has 28 references indexed in Scilit:
- Effects of Accelerated Ageing in a PTFE Matrix Polymer CompositeMacromolecular Symposia, 2011
- Accelerated ageing versus realistic ageing in aerospace composite materials. IV. Hot/wet ageing effects in a low temperature cure epoxy compositeJournal of Applied Polymer Science, 2007
- The effect of accelerated ageing of building wiresFire and Materials, 2007
- New data for sandwich panels on the correlation between the SBI test method and the room corner reference scenarioFire and Materials, 2004
- Prediction of time to flashover in the ISO 9705 room corner test based on cone calorimeter test resultsFire and Materials, 2002
- Full‐scale/Bench‐Scale correlations of wall and ceiling liningsFire and Materials, 1992
- Prediction of Heat Release Rates of Surface Materials in Large-Scale Fire Tests Based on Cone Calorimeter ResultsJournal of Testing and Evaluation, 1987
- Ignitability measurements with the cone calorimeterFire and Materials, 1987
- Development of the cone calorimeter—A bench‐scale heat release rate apparatus based on oxygen consumptionFire and Materials, 1984
- The development of the Arrhenius equationJournal of Chemical Education, 1984