Thermal-Fatigue Analysis of District-Heating Pipelines in China
Authors:
- 1 May 2020
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Pipeline Systems Engineering and Practice
- Vol. 11 (2)
Abstract
The temperature variation of the district heating (DH) pipelines during the operation is the most severe threat to the lifetime of the systems. The number of cycles used in the fatigue analysis in the European standard were based on the lEA projects, and there were no sufficient studies conducted in China. This paper aims to make reasonable estimations of the maximum number of temperature load cycles for DH pipelines in China. Based on the data, the rain flow cycle-counting algorithms were applied to calculate the number of full temperature cycles. The regression models of design lines between full temperature cycles and temperature variations were established. The maximum values for supply pipelines and return pipelines were obtained by using the design lines. The equivalent full action cycles ( and ) are about 200 cycles for supply pipelines and 136 cycles for return pipelines which are both less than 250 cycles recommended in the European standard. Using 200 for the supply pipelines and 136 for the return pipelines, the stress limits could increase from 707 to 750 MPa and from 707 to 823 MPa respectively.
Keywords
This publication has 11 references indexed in Scilit:
- Heating solutions for residential buildings in China: Current status and future outlookEnergy Conversion and Management, 2018
- An efficient online time-temperature-dependent creep-fatigue rainflow counting algorithmInternational Journal of Fatigue, 2018
- A review of leakage detection methods for district heating networksApplied Thermal Engineering, 2018
- Failure analysis of a thermally insulated pipeline in a district heating systemEngineering Failure Analysis, 2018
- Similitude criterion derivation and pipe physical property test and suitable analysis for water hammner scale model of long distance district heating pipelineApplied Thermal Engineering, 2017
- International review of district heating and coolingEnergy, 2017
- Identification of Individual District Heating Network Conditions using Equivalent Full Load CyclesEnergy Procedia, 2017
- Analysis of the location for peak heating in CHP based combined district heating systemsApplied Thermal Engineering, 2015
- Integrated assessment of failure probability of the district heating networkReliability Engineering & System Safety, 2015
- Fatigue data acquisition, evaluation and optimization of district heating pipesApplied Thermal Engineering, 2007